Passa al contenuto
Merck
Tutte le immagini(3)

Documenti

252980

Sigma-Aldrich

Copper(II) phthalocyanine

β-form, Dye content 90 %

Sinonimo/i:

CuPc

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
Tutte le immagini(3)

About This Item

Formula empirica (notazione di Hill):
C32H16CuN8
Numero CAS:
147-14-8
Peso molecolare:
576.07
Colour Index:
74160
Beilstein:
4121848
Numero CE:
205-685-1
Numero MDL:
MFCD00010719
Codice UNSPSC:
12352103
ID PubChem:
24855253
NACRES:
NA.23

Composizione

Dye content, 90%

λmax

678 nm

Prestazioni di un dispositivo OLED

ITO/CuPc/NPD/Alq3/C60/Mg:Ag

  • Color: green
  • Max. Luminance: 17200 Cd/m2

ITO/CuPc/NPD/Alq3/LiF/Al
  • Color: red
  • Max. Luminance: 2000 Cd/m2
  • Turn-On Voltage: 7.5 V

ITO/CuPc/NPD/CBP:FIrpic (6%)/BAlq3/LiF/Al
  • Color: blue
  • Max. EQE: 4.5 %

Prestazioni di un dispositivo OPV

ITO/CuPc/PTCDA/In

  • Short-circuit current density (Jsc): 53.1 mA/cm2
  • Open-circuit voltage (Voc): 0.57 V
  • Fill Factor (FF): 0.61
  • Power Conversion Efficiency (PCE): 4.2 %

ITO/PEDOT:PSS/CuPc/C60/BCP/Al
  • Short-circuit current density (Jsc): 18.8 mA/cm2
  • Open-circuit voltage (Voc): 0.58 V
  • Fill Factor (FF): 0.52
  • Power Conversion Efficiency (PCE): 3.6 %

Stringa SMILE

c1ccc2c(c1)C3=NC4=[N@@H]5C(=Nc6n7c(N=C8c9ccccc9C%10=[N@@H]8[Cu]57N3C2=N%10)c%11ccccc6%11)c%12ccccc4%12

InChI

1S/C32H16N8.Cu/c1-2-10-18-17(9-1)25-33-26(18)38-28-21-13-5-6-14-22(21)30(35-28)40-32-24-16-8-7-15-23(24)31(36-32)39-29-20-12-4-3-11-19(20)27(34-29)37-25;/h1-16H;/q-2;+2
XCJYREBRNVKWGJ-UHFFFAOYSA-N

Cerchi prodotti simili? Visita Guida al confronto tra prodotti

Codice della classe di stoccaggio

11 - Combustible Solids

Classe di pericolosità dell'acqua (WGK)

nwg

Punto d’infiammabilità (°F)

Not applicable

Punto d’infiammabilità (°C)

Not applicable

Dispositivi di protezione individuale

Eyeshields, Gloves, type N95 (US)

Certificati d'analisi (COA)

Cerca il Certificati d'analisi (COA) digitando il numero di lotto/batch corrispondente. I numeri di lotto o di batch sono stampati sull'etichetta dei prodotti dopo la parola ‘Lotto’ o ‘Batch’.

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

Zachary J Comeau et al.
ACS sensors, 4(10), 2706-2715 (2019-08-28)
Quality control is imperative for Cannabis since the primary cannabinoids, Δ9-tetrahydrocannabinol (THC) and cannabidiol (CBD), elicit very different pharmacological effects. THC/CBD ratios are currently determined by techniques not readily accessible by consumers or dispensaries and which are impractical for use
Alexander J Peltekoff et al.
Polymers, 12(6) (2020-06-04)
A library of statistically random pentafluorostyrene (PFS) and methyl methacrylate (MMA) copolymers with narrow molecular weight distributions was produced, using nitroxide mediated polymerization (NMP) to study the effect of polymer composition on the performance of bottom-gate top-contact organic thin-film transistors
Yu Li Huang et al.
Langmuir : the ACS journal of surfaces and colloids, 26(5), 3329-3334 (2010-02-24)
The self-assembly of the binary molecular system comprising copper(II) phthalocyanine (CuPc) and copper-hexadecafluoro-phthalocyanine (F(16)CuPc) on graphite has been investigated by in situ low-temperature scanning tunneling microscopy (LT-STM). The adsorption of this binary molecular system on graphite results in the formation
Masaya Hirade et al.
ACS applied materials & interfaces, 3(1), 80-83 (2011-01-05)
To enhance the performance of organic photovoltaic (OPV) cells, preparation of organic nanometer-sized pillar arrays is fascinating because a significantly large area of a donor/acceptor heterointerface having continuous conduction path to both anode and cathode electrodes can be realized. In
Jia Liu et al.
Journal of the American Chemical Society, 133(51), 21010-21015 (2011-11-24)
The bottom-up fabrication of surface hierarchical nanostructures is of great importance for the development of molecular nanostructures for chiral molecular recognition and enantioselective catalysis. Herein, we report the construction of a series of 2D chiral hierarchical structures by trinary molecular
Visualizza tutti i documenti correlati

Articoli

Understanding and Successfully Applying Materials for Dye-Sensitized Solar Cells

While dye sensitization as the basis for color photography has been accepted for a very long time,1 attempts to use this principle for the conversion of solar light to electricity generally had resulted only in very low photocurrents, below 100 nA/cm2.2

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.