1.00020
Acetone
for liquid chromatography LiChrosolv®
Synonym(s):
Dimethyl ketone, Propanone, 2-Propanone
Select a Size
Select a Size
About This Item
Recommended Products
grade
HPLC grade
Quality Level
vapor density
2 (vs air)
vapor pressure
184 mmHg ( 20 °C)
description
isocratic
product line
LiChrosolv®
Assay
≥99.8% (GC)
form
liquid
autoignition temp.
465 °C (DIN 51794)
potency
5800 mg/kg LD50, oral (Rat)
20000 mg/kg LD50, skin (Rabbit)
Looking for similar products? Visit Product Comparison Guide
1 of 4
This Item | 1.00012 | 1.00022 | 1.00014 |
|---|---|---|---|
| technique(s) HPLC: suitable | technique(s) gas chromatography (GC): suitable | technique(s) UV/Vis spectroscopy: suitable | technique(s) - |
| Quality Level 100 | Quality Level 100 | Quality Level 100 | Quality Level 300 |
| grade HPLC grade, isocratic | grade - | grade spectrophotometric grade | grade ACS reagent, for analytical purposes, for extraction, reagent grade |
| form liquid | form liquid | form liquid | form liquid |
| density 0.791 g/mL at 25 °C (lit.) | density 0.791 g/mL at 25 °C (lit.) | density 0.791 g/mL at 25 °C (lit.) | density 0.791 g/mL at 25 °C (lit.) |
General description
Application
Features and Benefits
- suitability tested and specified for UHPLC-MS and UHPLC-UV: for analytical flexibility
- specified quality in positive and negative in positive and negative electrospray ionization (ESI) and atmospheric-pressure chemical ionization-mass spectrometry (APCI-MS) for lowest detection limits and confidence in analyses for all important MS modes (test 1)
—ESI/APCI (-) < 10 ppb
- lowest impurity profile: for interference-free baselines (test 2)
- microfiltered through 0.2 μm filter (test 3) to provide:
—reduced risk of column clogging
- packed in borosilicate glass bottles for minimized metal ion contaminations
- lowest levels of trace metal impurities for a minimum metal ion adduct formation
- lowest level of polyethylene glycol (PEG) impurities in UHPLC-MS solvent lineup (PEG S/N signal-to-noise-ratio < 50)
Preparation Note
Other Notes
Legal Information
Signal Word
Danger
Hazard Statements
Precautionary Statements
Hazard Classifications
Eye Irrit. 2 - Flam. Liq. 2 - STOT SE 3
Target Organs
Respiratory system
Supplementary Hazards
Storage Class Code
3 - Flammable liquids
WGK
WGK 1
Flash Point(F)
1.4 °F - closed cup
Flash Point(C)
-17.0 °C - closed cup
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Need A Sample COA?
This is a sample Certificate of Analysis (COA) and may not represent a recently manufactured lot of this specific product.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Articles
This application note describes the HPTLC-based identification of fixed oils using octadecyl silyl silica gel as the coating substance, following USP 43 NF 38 monograph method containing USP general chapter <202>.
Protocols
Qualitative Thin Layer Chromatography Analysis of Flavonoids and Quantification of Terpene Lactones in Ginkgo Biloba Extracts and Tablets
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service
