1.06044
Dichloromethane
for liquid chromatography LiChrosolv®
Synonym(s):
DCM, Methylene chloride, Methylene dichloride, Methylene chloride
About This Item
Recommended Products
vapor density
2.9 (vs air)
Quality Level
vapor pressure
24.45 psi ( 55 °C)
6.83 psi ( 20 °C)
product line
LiChrosolv®
grade
isocratic
Assay
≥99.9% (GC)
form
liquid
autoignition temp.
1223 °F
605 °C (DIN 51794)
potency
1600 mg/kg LD50, oral (Rat)
>2000 mg/kg LD50, skin (Rat)
contains
2-methyl-2-butene as stabilizer
expl. lim.
22 %
technique(s)
HPLC: suitable
impurities
≤0.0002 meq/g Acidity
≤0.0002 meq/g Alkalinity
≤0.01% Water
evapn. residue
≤5.0 mg/L
transmittance
240 nm, ≥70%
245 nm, ≥90%
260 nm, ≥99%
refractive index
n20/D 1.424 (lit.)
pH
7 (20 °C)
bp
39.8-40 °C (lit.)
mp
-95 °C
−95 °C (lit.)
solubility
20 g/L
density
1.325 g/mL at 25 °C (lit.)
storage temp.
2-30°C
SMILES string
ClCCl
InChI
1S/CH2Cl2/c2-1-3/h1H2
InChI key
YMWUJEATGCHHMB-UHFFFAOYSA-N
Looking for similar products? Visit Product Comparison Guide
General description
Application
Features and Benefits
- suitability tested and specified for UHPLC-MS and UHPLC-UV: for analytical flexibility
- specified quality in positive and negative in positive and negative electrospray ionization (ESI) and atmospheric-pressure chemical ionization-mass spectrometry (APCI-MS) for lowest detection limits and confidence in analyses for all important MS modes (test 1)
—ESI/APCI (+) < 2 ppb
—ESI/APCI (-) < 10 ppb - lowest impurity profile: for interference-free baselines (test 2)
- microfiltered through 0.2 μm filter (test 3) to provide:
—a long lifespan to filters and mechanical parts of HPLC systems
—reduced risk of column clogging - packed in borosilicate glass bottles for minimum metal ion contaminations
- lowest levels of trace metal impurities for a minimum metal ion adduct formation
—< 5ppb - lowest level of polyethylene glycol (PEG) impurities in UHPLC-MS solvent lineup (PEG S/N signal-to-noise-ratio < 50)
Preparation Note
Analysis Note
Identity (IR): conforms
Acidity: ≤ 0.0002 meq/g
Alkalinity: ≤ 0.0002 meq/g
Transmission (at 240 nm): ≥ 70 %
Transmission (at 245 nm): ≥ 90 %
Transmission (from 260 nm): ≥ 99 %
Evaporation residue: ≤ 5.0 mg/l
Water: ≤ 0.01 %
The product is stabilized with 2-Methyl-2-buten.
Filtered by 0.2 µm filter
Other Notes
Legal Information
Signal Word
Warning
Hazard Statements
Precautionary Statements
Hazard Classifications
Carc. 2 - Eye Irrit. 2 - Skin Irrit. 2 - STOT SE 3
Target Organs
Central nervous system
Storage Class Code
6.1D - Non-combustible acute toxic Cat.3 / toxic hazardous materials or hazardous materials causing chronic effects
WGK
WGK 2
Flash Point(F)
does not flash
Flash Point(C)
does not flash
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Customers Also Viewed
Protocols
Silica gel G 254 plates are suitable for analysis of Dextromethorphan following the European pharmacopeia monograph.
Catalyst screening, KitAlysis™ High-Throughput Screening Kits, Thin layer chromatography (TLC), parallel analysis, parallel synthesisigh-Throughput Buchwald-Hartwig Amination Reaction Screening Kit, TLC-MS analysis
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service