MTGR65000

Aervent^® 50 Capsule Filter

pore size 0.2 μm

• Synonym(s): Aervent^®-50 Filter Unit 0.2 µm hydrophobic 1/8 in. NPTM-1/4 in. HB, EPA Est. 041237-FRA-001
• UNSPSC Code: 23151806
• eCl@ss: 32031690
• NACRES: NB.24

Properties

• material: PTFE membrane; polypropylene ; polypropylene housing
• Quality Level: 400
• sterility: non-sterile
• Sterilization Compatibility: gamma compatible
• product line: Aervent^®
• feature: hydrophobic
• manufacturer/tradename: Aervent^®
• parameter: 2.1 bar max. differential pressure at 25 °C; 4.1 bar max. inlet pressure (60 psi) at 25 °C
• technique(s): gas filtration: suitable
• L: 5.3 cm (2.1 in.)
• W: 2.4 in.
• diam.: 6.2 cm (2.4 in.)
• filtration area: 19.6 cm²
• impurities: ≤0.5 EU/mL (LAL test, Aqueous extraction)
• gravimetric extractables: ≤1.0 mg
• matrix: Aervent^®
• pore size: 0.2 μm pore size
• bubble point: ≥1100 mbar (16 psig), nitrogen with 60/40% IPA/water at 23 °C
• fitting: 3 mm (1/8 in.) male NPT inlet/outlet connection (One side); inlet/outlet hose for 6.5-9.5 mm I.D. silicone tubing (Other side)
• shipped in: ambient

Description

General description

This Aervent^® hydrophobic Capsule filter contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter, with a 0.2 μm pore size and 19.6 cm² filtration area, is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane within MTGR65000 provides high flow rates and throughput, low extractables and particle shedding, and broad chemical compatibility. For traceability and easy identification, each Aervent-50 filter is hot stamped with its catalogue number and lot number. Each Aervent^® Capsule Filter is integrity tested during manufacture.

Application

Typical Applications

• Sterile venting of vessels and carboys
• Autoclave vacuum break lines
• Low volume sterile filtration of non-aqueous fluids
• Small fermenter inlet and exhaust gas filtration

Analysis Note

Gravimetric Extractables: in 70/30 % IPA/water

Other Notes

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Legal Information

AERVENT is a registered trademark of Merck KGaA, Darmstadt, Germany