821873

TSKgel^® G3000PW_XL-CP HPLC Column

phase hydroxylated methacrylate, L × I.D. 30 cm × 7.8 mm, 7 μm particle size

• Synonym(s): TSKgel^® Size Exclusion (PW-Type) HPLC Column
• UNSPSC Code: 41115711
• eCl@ss: 32110501

Properties

• material: stainless steel hardware
• Agency: suitable for USP L37; suitable for USP L38; suitable for USP L39
• product line: TSKgel^®
• manufacturer/tradename: Tosoh 21873
• parameter: ≤0.5 M salt concentration; ≤20% organic solvent; 1 mL/min flow rate; 55 bar max. pressure; 60 °C temperature
• technique(s): HPLC: suitable
• L × I.D.: 30 cm × 7.8 mm
• matrix: polymer particle platform
• matrix active group: hydroxylated methacrylate phase
• particle size: 7 μm
• pore size: 200 Å pore diameter
• operating pH: 2-12
• separation technique: size exclusion (SEC)

Description

General description

TSKgel PW_XL-CP columns were specifically developed for the analysis of water-soluble cationic polymers. Composed of polymethacrylate beads, cationic groups are introduced on the surface of the TSKgel PW_XL-CP packing material to prevent adsorption of cationic polymers and allow elution under low salt conditions. These columns show high theoretical plate numbers, linear calibration curves and high durability because the base resin is the same as that used in the TSKgel PW_XL series columns. Three columns are available within the TSKgel PW_XL-CP series, each with a different particle size, separation range and exclusion limit, allowing polymers within a wide molecular mass range to be separated and characterized.

Application

Exclusion limit (Da): 100,000
Separation range (Da) (PEO,PEG): 200~50,000

Physical form

Shipped in water.

Recommended products

Discover LiChropur reagents ideal for HPLC or LC-MS analysis

Legal Information

TSKgel is a registered trademark of Tosoh Corporation