1.51343

LiChrosorb^® Si 60 (5 µm) HPLC Columns

L x I.D. 125 mm x 4 mm, LiChroCART^® HPLC cartridge, manuCART^™ holder required for use

• Synonym(s): TM=["LiChrosorb"] Si TM=["LICHROCART"] cartridge for HPLC
• UNSPSC Code: 41115709
• NACRES: SB.52

Properties

• product name: LiChrosorb^® Si 60 (5 µm) LiChroCART^® 125-4, suitable for HPLC
• material: stainless steel column
• Quality Level: 100
• Agency: suitable for USP L3
• product line: LiChrosorb^®
• feature: endcapped: no
• parameter: 250 bar pressure; 60 °C max. temp.
• technique(s): HPLC: suitable; mass spectrometry (MS): suitable (Low)
• column L × I.D.: 12.5 cm × 4 mm
• matrix: fully porous particle
• matrix active group: Silica bonding phase
• particle size: 5 μm
• pore size: 60 Å pore size
• operating pH range: 2-7.5
• separation technique: hydrophilic interaction (HILIC); normal phase
• storage temp.: no temp limit

Description

General description

HPLC cartridge

LiChrosorb^® Si 60 is a reliable irregular shaped silica sorbents with a pore diameter of 60A for normal phase chromatography.This sorbent is packed into a LiChroCART 125-4 HPLC cartridge. The connection to the HPLC system is being accomplished by use of the manu-CART NT cartrige holder (1.51486).

Analysis Note

Pressure: ≤ 40 bar
Theoretical Plates (N/m) (2-Nitrotoluene): ≥ 50000
Symmetry (2-Nitrotoluene): 0.8 - 1.4
Capacity factor (2-Nitrotoluene): 0.5 - 2.0

Legal Information

LICHROCART is a registered trademark of Merck KGaA, Darmstadt, Germany

LiChrosorb is a registered trademark of Merck KGaA, Darmstadt, Germany