Z742705
BenchMixer™ XLQ QuEChERs Shaker/Vortexer
AC/DC input 115 V AC, US 2-pin plug
Synonyme(s) :
dispersive solid phase extraction, vortex mixer, vortexer lab
About This Item
Produits recommandés
Gamme de produits
BenchMixer™
Caractéristiques
(3.6 mm orbit)
Conditionnement
pack of 1 ea
Fabricant/nom de marque
Benchmark Scientific BV1010-TST
Paramètres
speed (500-2500 rpm)
Technique(s)
QuEChERS: suitable
L totale × l × H
15 in. (38.5 cm) × 9.2 in. (23.5 cm) × 16.5 in. (42 cm)
Plateforme, L × l
12 in. (30 cm) × 7 in. (17.8 cm)
Vous recherchez des produits similaires ? Visite Guide de comparaison des produits
Description générale
Multiple samples can be processed simultaneously in the Benchmixer XLQ′s large capacity racks, saving time and preventing operator fatigue. The vigorous, consistent shaking ensures all samples are exposed to identical conditions within the same batch of samples, as well as between batches.
The BenchMixer XLQ creates a true vortex in vertical sample racks by holding the top of the tube stationary while the bottom rotates in a 3.6mm orbit. Time and speed are precisley controlled by the digital microprocessor. A pulse mode allows for more vigorous mixing. Quiet operation, minimal vibration and a long service life are guaranteed by the precisely balanced drive system and powerful motor.
Using the BenchMixer XLQ is simple. To load the sample racks, loosen the knobs on the stationary steel rods and raise the top sample plate. One rod is shorter than the other, allowing the plate to be lifted up and swiveled to one side. After samples are loaded, lower the plate into place and tighten the knobs. Select the desired speed and run time on the digital control panel and press start. The BenchMixer XLQ can perform unattended mixing for as little as 1 minute or up to 100 hours.
While the BenchMixer XLQ is configured primarily for QuEChERS protocols, additional racks are available to accommodate nearly any type of vessel commonly found in the laboratory.
Informations légales
Produit(s) apparenté(s)
Certificats d'analyse (COA)
Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".
Déjà en possession de ce produit ?
Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.
Articles
To show product safety, it is mandatory to test cannabis flowers for the presence of pesticides. In this article, we show a complete workflow for sample preparation and analysis of cannabis for the pesticides registered in California, by LC-MS/MS and GC-MS/MS
Protocoles
Complete workflow for the comprehensive analysis of terpenes in cannabis
HPLC separation of 17 important cannabinoids including CBD, delta 9 THC and THCA. Read the application note
Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..
Contacter notre Service technique