1.52271
Chromolith® WP 300 RP-18 (monolithic) HPLC Columns
L × I.D. 50 mm x 4.6 mm HPLC Column
Synonyme(s) :
Chromolith® WP 300 RP-18 50-4.6 HPLC column
About This Item
product name
Chromolith® WP 300 RP-18, L × I.D. 50 mm x 4.6 mm HPLC column
Matériaux
PEEK column
Niveau de qualité
Agence
suitable for USP L1
Gamme de produits
Chromolith®
Caractéristiques
endcapped: no
endcapped: no
Conditionnement
1 ea of
Ampleur du marquage
18% Carbon loading
18% loading
Paramètres
200 bar pressure
200 bar pressure
60 °C max. temp.
60 °C max. temp.
Technique(s)
HPLC: suitable
HPLC: suitable
LC/MS: suitable
mass spectrometry (MS): suitable (High)
mass spectrometry (MS): suitable
Colonne, L × D.I.
5 cm × 4.6 mm
Superficie
300 m2/g
Matrice
monolithic silica
monolithic silica
Groupe de la matrice active
C18 bonding phase
C18 bonding phase
Dimension de pores
2 μm macroporosity
2 μm macroporosity
30 mm mesoporosity
30 nm mesoporosity
operating pH range
1.5-7.5
2-7.5
Technique de séparation
reversed phase
Température de stockage
no temp limit
Vous recherchez des produits similaires ? Visite Guide de comparaison des produits
Description générale
Accurate analysis of proteins, antibodies, and large peptides requires columns with good permeability, along with better mass transfer and selectivity. In order for size-exclusion not to influence the separation, the pore size should be approximately ten times larger than the molecule being analyzed.Chromolith columns have shown great potential and superiority in comparison to standard silica. Chromolith® WP 300 columns are made of monolithic silica with a characteristic bimodal pore structure.
Chromolith® WP 300 RP-18 columns have macropores with 2 μm diameter, giving a column efficiency exceeding 80,000 plates/meter. The mesopores are 30 nm (300 Å), and the surface modification is Octadecylsilane. Chromolith® WP 300 RP-18 columns fall under the USP L1 Classification. The column efficiency is comparable to a 5 μm particle size fully porous particulate column. Chromolith® WP 300 RP-18 columns are suitable for LC-MS applications.The column dimension of 50 mm length and 4.6 mm I.D. is the best choice for very fast separations of Biomolecules on any HPLC System.Chromolith® WP 300 RP-18 50-4.6 HPLC columns enable:
- Completely bioinert column hardware and high biorecovery
- High-speed separations at very low column back-pressure
- High matrix tolerance, allowing time and cost savings with simplified workflows
- Cost-savings due to extended column lifetimes
- Connection of columns, flow gradients, and the use of mobile phases with higher viscosity
Informations légales
Certificats d'analyse (COA)
Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".
Déjà en possession de ce produit ?
Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.
Contenu apparenté
Analytical Chromolith® HPLC columns for Bio applications, 300A mesopores: RP-18, RP-8, RP-4, Prot-A, Epoxy
Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..
Contacter notre Service technique