Accéder au contenu
Merck
Toutes les photos(1)

Key Documents

1.51913

Supelco

Purospher® STAR NH2 (5 µm) HPLC Columns

L × I.D. 250 mm x 4.6 mm Hibar® RT HPLC Column

Synonyme(s) :

Purospher® STAR NH2 (5µm) Hibar® RT 250-4.6

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme


About This Item

Code UNSPSC :
41115700
Nomenclature NACRES :
SB.52

product name

Purospher® STAR NH2 (5 µm), L × I.D. 250 mm x 4.6 mm Hibar® RT HPLC column

Matériaux

stainless steel column

Agence

suitable for USP L8

Gamme de produits

Purospher®

Caractéristiques

endcapped: no

Conditionnement

1 ea of

Ampleur du marquage

3.5% Carbon loading

Paramètres

400 bar pressure
65 °C max. temp.

Technique(s)

HPLC: suitable
LC/MS: suitable
mass spectrometry (MS): suitable (Low - Medium)

Colonne, L × D.I.

25 cm × 4.6 mm

Superficie

330 m2/g

Matrice

fully porous particle

Groupe de la matrice active

NH2 bonding phase

Taille des particules

5 μm

Dimension de pores

120 Å pore size

operating pH range

1.5-10.5

Technique de séparation

hydrophilic interaction (HILIC)
normal phase
reversed phase
supercritical fluid (SFC)

Température de stockage

no temp limit

Description générale

Purospher® STAR NH2, 5 µm HPLC columns are widely used for carbohydrate analysis, with a typical mobile phase consisting of acetonitrile and water. In terms of their polarity, these columns lie between bare silica and reversed-phase silica. Hence, Purospher® STAR NH2 can also be used as an ion-exchanger. In acidic solutions, the NH2-groups are protonated (-NH3 +X-) and therefore display the characteristics of a weak anion exchanger. Medium polarity Purospher® STAR NH2 columns possess hydrophilic as well as hydrophobic properties, thus can be used under both reversed-phase (HILIC) and normal-phase conditions. However, retention is weaker than on silica or RP-supports. Purospher® STAR NH2 columns are based on ultra-pure fully porous silica particles (Type B). Purospher® STAR NH2, 5 µm Hibar® RT 250-4.6 is a ready to use stainless steel column suitable for connection to any HPLC system.The recommended guard column is Purospher® STAR NH2 (5 µm) LiChroCART 4-4 part number 1.50267.0001 [https://www.sigmaaldrich.com/US/en/product/mm/150267]. For direct connection to a Hibar® RT columns the Precolumn holder for 4-4 LiChroCART cartridges, part number 1.51487.0001 can be used. The column dimension of 250 mm length x 4.6 mm I.D. is the optimal choice for the HPLC separation of complex.Learn more about Purospher® STAR HPLC and UHPLC ColumnsLearn more about the Supelco HPLC Column portfolio and Method development:Brochure: HPLC and UHPLC Column Selection GuideBrochure: A Practical Guide to HPLC - Method Development Guide

Application

Intended for the separation of alcohols, carboxylic acids, fat-soluble vitamins, nucleotides, steroids, sugars, sugar alcohols, sweeteners, and water-soluble vitamins.

Caractéristiques et avantages

  • Reproducible results from run-to-run and batch-to-batch

Informations légales

Hibar is a registered trademark of Merck KGaA, Darmstadt, Germany
LICHROCART is a trademark of Merck KGaA, Darmstadt, Germany
Purospher is a registered trademark of Merck KGaA, Darmstadt, Germany

Certificats d'analyse (COA)

Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique