Accéder au contenu
Merck
Toutes les photos(2)

Key Documents

791504

Sigma-Aldrich

Carbon nanotube, single-walled

greener alternative

conductive aqueous ink, 0.9-1.1 mg/mL SWCNT(concentration by Absorbance at 854 nm)

Synonyme(s) :

CG300-Aqueous Ink, SWCNT Ink, SWNT Ink, SWeNT AC200, Single-Walled Carbon Nanotube Ink

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme
Toutes les photos(2)

About This Item

Code UNSPSC :
12352103
Nomenclature NACRES :
NA.23

product name

Carbon nanotube, single-walled, conductive aqueous ink, 0.9-1.1 g/L (SWCNT concentration by Absorbance at 854 nm), avg. no. of layers, 1

Forme

dispersion in H2O (black liquid)

Niveau de qualité

100

Caractéristiques

avg. no. of layers 1

Caractéristiques du produit alternatif plus écologique

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

sustainability

Greener Alternative Product

Concentration

0.9-1.1 g/L (SWCNT concentration by Absorbance at 854 nm)

Résistance de la couche

<600 Ω/sq, at 85% VLT (ohm/square) (by 4-point probe on prepared film by rod coating)

Viscosité

3.0 mPa.s (at 10 sec-1 shear rate)

Densité

1 g/cm3

Autre catégorie plus écologique

, Enabling

Description générale

We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". Click here for more information.

Application

This conductive ink is aqueous based and contains highly conductive single wall carbon nanotubes and is formulated for spray coating.This ink is primarily intended for making highly transparent conductive films on a variety of substrates.

Informations légales

Product of Chasm Advanced Materials, Inc.
Signis is a registered trademark of Chasm Advanced Materials, Inc.
CoMoCAT is a trademark of Chasm Advanced Materials, Inc.
CHASM is a trademark of Chasm Advanced Materials, Inc.

Pictogrammes

Exclamation mark
GHS07

Mention d'avertissement

Warning

Mentions de danger

H319,H412

Classification des risques

Aquatic Chronic 3 - Eye Irrit. 2

Code de la classe de stockage

12 - Non Combustible Liquids

Classe de danger pour l'eau (WGK)

WGK 3

Point d'éclair (°F)

Not applicable

Point d'éclair (°C)

Not applicable

Faites votre choix parmi les versions les plus récentes :

Certificats d'analyse (COA)

Lot/Batch Number
MKCQ0177
MKCP1975
MKCK6865
MKCJ3158
MKCG8531

Vous ne trouvez pas la bonne version ?

Si vous avez besoin d'une version particulière, vous pouvez rechercher un certificat spécifique par le numéro de lot.

Rechercher un(e) COA

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Les clients ont également consulté

Slide 1 of 4

1 of 4

Carbon nanotube, single-walled (6,5) chirality, &#8805;95% carbon basis (&#8805;95% as carbon nanotubes), 0.78&#160;nm average diameter

Sigma-Aldrich

773735

Carbon nanotube, single-walled

Carbon nanotube, single-walled 98% (Semiconducting), avg. no. of layers, 1

Sigma-Aldrich

750522

Carbon nanotube, single-walled

Graphene ink for inkjet printing, photonically annealable

Sigma-Aldrich

900695

Graphene ink

Graphene ink for screen printing, with ethyl cellulose in terpineol, screen printable

Sigma-Aldrich

798983

Graphene ink

Articles

Graphene Inks for Printed Electronics

The emerging field of printed electronics requires a suite of functional materials for applications including flexible and large-area displays, radio frequency identification tags, portable energy harvesting and storage, biomedical and environmental sensor arrays,5,6 and logic circuits.

Boron Nitride Nanotubes: Properties, Synthesis and Applications

Boron nitride nanotubes (BNNT) are close structural analogs of carbon nanotubes (CNT), which are high aspect ratio nanotubular material, where carbon atoms are alternately substituted by nitrogen and boron atoms.

Organic Bioelectronic Materials and Devices for Bridging Biology and Traditional Electronics

Professor Rivnay (Northwestern University, USA) discusses using organic mixed conductors as an alternative to efficiently bridge the ionic world of biology with contemporary microelectronics.

3D Printable Conductive Nanocomposites of PLA and Multi-walled Carbon Nanotubes

A nanocomposite is typically defined as a mixture between a host material (e.g., polymer matrix) and nanofillers with at least one dimension of less than 100 nm.

Afficher tout

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique