Accéder au contenu
Merck
Toutes les photos(3)

Documents

305812

Sigma-Aldrich

Titanium

5-10 mm, ≥99.99% trace metals basis (purity exclusive of Na and K content)

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme
Toutes les photos(3)

About This Item

Formule empirique (notation de Hill):
Ti
Numéro CAS:
7440-32-6
Poids moléculaire :
47.87
Numéro CE :
231-142-3
Numéro MDL:
MFCD00011264
Code UNSPSC :
12141746
ID de substance PubChem :
24858457
Nomenclature NACRES :
NA.23

Pureté

≥99.99% trace metals basis (purity exclusive of Na and K content)

Température d'inflammation spontanée

860 °F

Résistivité

42.0 μΩ-cm, 20°C

Taille des particules

5-10 mm

Point d'ébullition

3287 °C (lit.)

Pf

1660 °C (lit.)

Densité

4.5 g/mL at 25 °C (lit.)

Chaîne SMILES 

[Ti]

InChI

1S/Ti

Clé InChI

RTAQQCXQSZGOHL-UHFFFAOYSA-N

Code de la classe de stockage

11 - Combustible Solids

Classe de danger pour l'eau (WGK)

nwg

Point d'éclair (°F)

Not applicable

Point d'éclair (°C)

Not applicable

Équipement de protection individuelle

Eyeshields, Gloves, type N95 (US)

Certificats d'analyse (COA)

Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Les clients ont également consulté

Slide 1 of 6

1 of 6

Titanium powder, max. particle size 75 micron, weight 200 g, purity 99.5%

GF56344057

Titanium

Titanium sheet, thickness 5.0 mm, size 20 × 20 mm, tolerance 0.2

GF84634645

Titanium

Titanium powder, max. particle size 150 micron, weight 50 g, purity 99.5%

GF05137501

Titanium

Chromium chips, 99.995% trace metals basis

Sigma-Aldrich

374849

Chromium

Titanium wire, diam. 1.0 mm, 99.99% trace metals basis

Sigma-Aldrich

266035

Titanium

Titanium foil, thickness 0.127 mm, ≥99.99% trace metals basis

Sigma-Aldrich

460397

Titanium

A Kurbad et al.
International journal of computerized dentistry, 16(2), 125-141 (2013-08-13)
This article presents two novel options for lithium-disilicate restorations supported by single-tooth implants. By using a Ti-Base connector, hybrid abutments and hybrid abutment crowns can be fabricated for different implant systems. The latter option in particular is an interesting new
Jinho Shin et al.
Journal of nanoscience and nanotechnology, 13(8), 5807-5810 (2013-07-26)
In this study, hydroxyapatite (HA) was coated on anodized titanium (Ti) surfaces through radio frequency magnetron sputtering in order to improve biological response of the titanium surface. All the samples were blasted with resorbable blasting media (RBM). RBM-blasted Ti surface
R Khataee et al.
Journal of nanoscience and nanotechnology, 13(7), 5109-5114 (2013-08-02)
In the present study, self-cleaning and mechanical properties of white Portland cement by addition of commercial available TiO2 nanoparticles with the average particle size of 80 nm were investigated. X-ray diffraction (XRD), transmission electron microscopy (TEM) and BET were used
Study of a TiO2 photocatalytic coating for use in plasma catalysis.
K Van Wesenbeeck et al.
Communications in agricultural and applied biological sciences, 78(1), 227-233 (2013-07-24)
Woo-Byoung Kim et al.
Journal of nanoscience and nanotechnology, 13(7), 4622-4626 (2013-08-02)
To investigate the microstructural effects of the synthesized TiO2 nanopowders such as particle size, specific surface area, pore size and pore distributions for the application of an anode material of dye-sensitized solar cells (DSSC), size-controlled and well-dispersed TiO2 nanopowders were
Afficher tous les articles scientifiques apparentés

Articles

Biomedical Implant Devices Fabricated from Low Young’s Modulus Titanium Alloys Demonstrating High Mechanical Biocompatibility

Biomedical implants are essentially foreign substances within the human body that must survive many years’ exposure to demanding mechanical and physiological conditions. Despite these challenges, metal implants have been widely used to substitute for or rebuild hard tissues such as bones and teeth.

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique