CS20MS01L3

Clarisolve^® Depth Filters

High-density cell cultures

• Synonym(s): Clarisolve 20 m Depth Filters in Pod Format, 23 cm² (0.025 ft²)
• UNSPSC Code: 23151806
• eCl@ss: 32031690
• NACRES: NB.24

Properties

• material: Millistak+^® media; polypropylene
• Quality Level: 300
• manufacturer/tradename: Clarisolve^®
• parameter: 1.0 bar max. differential pressure (15 psid) at 40 °C (Reverse); 2.1 bar max. differential pressure (30 psid) at 40 °C (Forward); 3.5 bar max. differential pressure (50 psid) at ≤40 °C (Maximum)
• H: 6.99 cm (2.75 in.)
• L: 9.07 cm (3.57 in.)
• W: 4.98 cm (1.96 in.)
• filtration area: 0.0023 m²
• impurities: <0.25 EU/mL (LAL test, Aqueous extraction; on filter media only)
• total organic carbon (TOC) residue: 1.4-2.1 μg/L
• input: sample type liquid
• conductivity: 0.80 – 1.59 μS/cm
• shipped in: ambient

Description

General description

product water; post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. A sample of filtrate was pulled every 2 minutes during flush and tested for conductivity.

Application

High-density cell cultures

Specifications

Filter Grade: 20MS

Preparation Note

Sterilization Method
2 autoclave cycles of 60 minutes at 123 °C

Analysis Note

Total organic carbon (TOC) residue: Post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. At the end of the flush, a sample was pulled for TOC typical values.

Legal Information

CLARISOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, Germany

Safety Information

• Storage Class Code: 13 - Non Combustible Solids
• WGK: nwg
• Flash Point(F): Not applicable
• Flash Point(C): Not applicable