503215

Carbon Dioxide Trap

volume 250 cc, 1/4 in. fitting

• Sinónimos: CO2 TRAP 250CC, 1/4IN FITTINGS
• Número CE: 215-185-5
• Código UNSPSC: 12000000

Propiedades

• volumen: 250 cc
• Adaptador: 1/4 in. fitting

Descripción

Descripción general

Sodium hydroxide nonfibrous silicate material is universally accepted for its high absorptive capacity and indicating properties for carbon dioxide. Typically, this material will absorb 20-30% of its weight in carbon dioxide before replacement of the saturated material is required. As carbon dioxide is absorbed, the greenish-brown material turns white because of the formation of sodium carbonate. The trap body is constructed of borosilicate glass, and the fittings are nickel-plated and have sintered stainless steel frits.

A moisture trap should be installed downstream from this unit to absorb the moisture that is produced.

Note: Exercise extreme caution when refilling the trap due to the caustic nature of the absorbent.

Dimensions:

• 100 cc Traps: 123/4 in. (32.4 cm) long x 13/4 in. (44 mm) diameter
• 250 cc Traps: 171/2 in. (44.4 cm) long x 2 in. (51 mm) diameter

Información de seguridad

• Pictogramas: GHS05
• Palabra de señalización: Danger
• Frases de peligro: H290,H314
• Consejos de prudencia: P234 - P260 - P280 - P303 + P361 + P353 - P304 + P340 + P310 - P305 + P351 + P338
• Clasificaciones de peligro: Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1A
• Código de clase de almacenamiento: 8B - Non-combustible corrosive hazardous materials
• Clase de riesgo para el agua (WGK): WGK 3
• Punto de inflamabilidad (°F): Not applicable
• Punto de inflamabilidad (°C): Not applicable
• Equipo de protección personal: Eyeshields, Faceshields, Gloves, type P3 (EN 143) respirator cartridges