GBL666505

Grace Bio-Labs Press-To-Seal silicone isolator, PSA both sides

wells, 8 (Round, 9mm diameter, 0.8mm depth), (Adhesive on both sides)

• Sinónimos: Nonadhesive reagent isolators, autoclavable slide chambers, removable hydrophobic barrier
• Código UNSPSC: 41161502
• NACRES: NB.22

Propiedades

• Materiales: red silicon
• Características: wells 8 (Round, 9mm diameter, 0.8mm depth); (Adhesive on both sides)
• envase: pack of 25 ea
• fabricante / nombre comercial: Grace Bio-Labs 666505
• externo L × An: 51 mm × 25 mm
• superficie del pocillo: 0.64 cm²
• pocillos: 8

Descripción

Descripción general

Silicone Isolators allow researchers to isolate specimens using removable hydrophobic barriers. They may be used to isolate cells grown in culture dishes or separate multiple specimens affixed to microscope slides. Isolators are available in red silicone thickness 0.5 to 2.5mm pre-cut or as sheet material with or without secure seal clean adhesive on one or both surfaces. Nonadhesive isolators are autoclavable and reusable.

Silicone Isolators remain sealed to smooth surfaces during washing steps. Where additional sealing is required, SecureSeal adhesive on one or both surfaces is recommended. Each seal design is also available in CultureWell "water-clear" silicone, which is highly recommended for sensitive cell culture applications. Closed chambers may be formed using flexible RNase free, HybriSlip covers. Recommended use temperature is -62°C to 218°C.