07679
Abberior® STAR 635P, NHS ester
suitable for fluorescence
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
Código UNSPSC:
12352108
NACRES:
NA.32
Productos recomendados
mol peso
Mw 1030 g/mol
Nivel de calidad
solubilidad
DMF: 0.25 mg/mL, clear
fluorescencia
λex 634 nm; λem 654 nm±10 nm in PBS, pH 7.4
idoneidad
suitable for fluorescence
temp. de almacenamiento
−20°C
Descripción general
Abberior STAR635P is the first member of an entirely new class of dyes introduced exclusively by Abberior - first commercially available phosphorylated fluorescent dye. The dye excels in its photophysical parameters, e.g. very bright, very stable and it enables basically background free imaging.
Abberior STAR 635P can substitute Atto™ 647N, AlexaFluor 647, or Cy5. It can be excited with diode lasers (635 nm, 650 nm) or with the 647 nm line of a Krypton laser. For STED, a depletion wavelength of 750 - 780 nm is recommended. Please see reference1 for detailled characteristics.
Best results are obtained with freshly prepared samples.
Abberior STAR 635P particularly well suits the Leica TCS STED system and delivers high-resolution STED images with unmatched quality, e.g. extremely low/no background. The dye serves as an ideal partner for several 2-color STED.
Key Features
Absorption Maximum, λmax: 638 nm (PBS, pH 7.4)
Extinction Coefficient, ε(λmax): 120′000 M-1cm-1 (PBS, pH 7.4)
Correction Factor, CF260 = ε260/εmax: 0.21 (PBS, pH 7.4)
Correction Factor, CF280 = ε280/εmax: 0.40 (PBS, pH 7.4)
Fluorescence Maximum, λfl: 651 nm (PBS, pH 7.4)
Recommended STED Wavelength, λSTED: 750 - 780 nm
Fluorescence Quantum Yield, η: 0.90 (PBS, pH 7.4)
Fluorescence Lifetime, τ: 3.3 ns (PBS, pH 7.4)
Abberior STAR 635P can substitute Atto™ 647N, AlexaFluor 647, or Cy5. It can be excited with diode lasers (635 nm, 650 nm) or with the 647 nm line of a Krypton laser. For STED, a depletion wavelength of 750 - 780 nm is recommended. Please see reference1 for detailled characteristics.
Best results are obtained with freshly prepared samples.
Abberior STAR 635P particularly well suits the Leica TCS STED system and delivers high-resolution STED images with unmatched quality, e.g. extremely low/no background. The dye serves as an ideal partner for several 2-color STED.
Key Features
- First phosphorylated dye
- Unmatched, background free STED imaging contrast
- Verified in the Leica STED system
Absorption Maximum, λmax: 638 nm (PBS, pH 7.4)
Extinction Coefficient, ε(λmax): 120′000 M-1cm-1 (PBS, pH 7.4)
Correction Factor, CF260 = ε260/εmax: 0.21 (PBS, pH 7.4)
Correction Factor, CF280 = ε280/εmax: 0.40 (PBS, pH 7.4)
Fluorescence Maximum, λfl: 651 nm (PBS, pH 7.4)
Recommended STED Wavelength, λSTED: 750 - 780 nm
Fluorescence Quantum Yield, η: 0.90 (PBS, pH 7.4)
Fluorescence Lifetime, τ: 3.3 ns (PBS, pH 7.4)
Idoneidad
Designed and tested for fluorescent super-resolution microscopy
Otras notas
Información legal
Atto is a trademark of Atto-Tec GmbH
abberior is a registered trademark of Abberior GmbH
Producto relacionado
Referencia del producto
Descripción
Precios
Código de clase de almacenamiento
11 - Combustible Solids
Clase de riesgo para el agua (WGK)
WGK 3
Punto de inflamabilidad (°F)
Not applicable
Punto de inflamabilidad (°C)
Not applicable
Elija entre una de las versiones más recientes:
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Sören Brandenburg et al.
Frontiers in physiology, 9, 1227-1227 (2018-10-24)
Rationale: Recently, abundant axial tubule (AT) membrane structures were identified deep inside atrial myocytes (AMs). Upon excitation, ATs rapidly activate intracellular Ca2+ release and sarcomeric contraction through extensive AT junctions, a cell-specific atrial mechanism. While AT junctions with the sarcoplasmic
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico