NIST1258-I

Aluminum alloy 6011

NIST^® SRM^® 1258-I

• Código UNSPSC: 12352311
• NACRES: NA.24

Propiedades

• grado: certified reference material
• Nivel de calidad: 100
• envase: pkg of disk
• fabricante / nombre comercial: NIST^®
• formato: matrix material

Descripción

Descripción general

Each unit of SRM 1258-I contains a wrought and annealed disk with dimensions 35 mm in diameter and 19 mm in thickness.



SRM 1258-I_cert

SRM 1258-I_SDS

Aplicación

Aluminum Alloy 6011 standard reference material (SRM) is primarily intended for evaluating the methods used to analyze elements in aluminum alloys of similar matrix.

Características y beneficios

• Accompanied with certificate documenting NIST-certified and reference mass fraction values, coverage factor (k),and expanded uncertainty for total elements in an aluminum matrix of SRM1258-I.
• Information values for beryllium and gallium are reported as mass fractions.
• The certified values are metrologically traceable to the derived SI unit of mass fraction, expressed in%.
• The NIST certificate is provided with expiration certificate, storage, handling, maintenance,and use instructions.

Otras notas

Certified for the analytes listed below.
Silicon (Si), Iron (Fe), Copper (Cu), Manganese (Mn), Magnesium (Mg), Zinc (Zn)

Reference/Informational value is provided for the following analytes.
Beryllium (Be), Gallium (Ga), Chromium (Cr), Nickel (Ni), Titanium (Ti), Beryllium (Be), Gallium (Ga)

See certificate for values and more details at nist.gov/SRM.

Información legal

NIST is a registered trademark of National Institute of Standards and Technology

SRM is a registered trademark of National Institute of Standards and Technology

Información de seguridad

• Código de clase de almacenamiento: 11 - Combustible Solids
• Clase de riesgo para el agua (WGK): WGK 3
• Punto de inflamabilidad (°F): Not applicable
• Punto de inflamabilidad (°C): Not applicable