NIST1090
Oxygen in ingot iron
NIST SRM 100B
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
Código UNSPSC:
41116107
NACRES:
NA.24
Productos recomendados
grado
certified reference material
Nivel de calidad
envase
pkg of rod
fabricante / nombre comercial
NIST®
Formato
matrix material
Categorías relacionadas
Descripción general
This Standard Reference Material (SRM) is intended for use in the evaluation of methods and the calibration of equipment used in the determination of oxygen in iron or ferrous materials. SRM 1090 is in the form of an ingot iron rod, 0.635 cm in diameter and 10.2 cm long (1/4 in. diamter and 4 in. long.) For more information, please refer to the COA and SDS.
SRM 1090_cert
SRM 1090_SDS
SRM 1090_cert
SRM 1090_SDS
Otras notas
Certified for the analytes listed below.
Oxygen (O)
Reference/Informational value is provided for the following analytes.
Nitrogen (N)
See certificate for values and more details at nist.gov/SRM.
Oxygen (O)
Reference/Informational value is provided for the following analytes.
Nitrogen (N)
See certificate for values and more details at nist.gov/SRM.
Información legal
NIST is a registered trademark of National Institute of Standards and Technology
Código de clase de almacenamiento
13 - Non Combustible Solids
Clase de riesgo para el agua (WGK)
WGK 3
Punto de inflamabilidad (°F)
Not applicable
Punto de inflamabilidad (°C)
Not applicable
Elija entre una de las versiones más recientes:
Certificados de análisis (COA)
Lot/Batch Number
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documentos section.
Si necesita más asistencia, póngase en contacto con Atención al cliente
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico