288500
Gel de sílice
high-purity grade, pore size 60 Å, 2-22 μm particle size distribution, without binder, suitable for thin layer chromatography (TLC)
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
About This Item
Número de CAS:
Número CE:
Número MDL:
Código UNSPSC:
41115711
ID de la sustancia en PubChem:
NACRES:
NC.07
Productos recomendados
grado
high-purity grade
Nivel de calidad
Formulario
powder
fabricante / nombre comercial
Sigma-Aldrich
técnicas
thin layer chromatography (TLC): suitable
superficie
~500 m2/g
impurezas
≤0.01% Fe3+
Distribución del tamaño de partículas
2-22 μm
tamaño de poro
60 Å pore size
pH
~6.8 (10% in aq. suspension)
bp
2230 °C
mp
>1600 °C
trazas de anión
chloride (Cl-): ≤0.01%
cadena SMILES
O=[Si]=O
InChI
1S/O2Si/c1-3-2
Clave InChI
VYPSYNLAJGMNEJ-UHFFFAOYSA-N
¿Está buscando productos similares? Visita Guía de comparación de productos
Descripción general
Silica gel is a rigid 3D network of colloidal silica. It is exclusively used as a support material for the active titanium(III) centers in Ziegler-Natta catalysts. It allows a controlled fragmentation resulting in the formation of uniform polymer particles with narrow particle size distribution and high bulk density. Silica gel is classified as below:
a. Aquagel - pores are filled with water
b. Xerogel - by the process of evaporation, aqueous phase in the pores are removed
c. Aerogel - solvent removed by supercritical extraction
a. Aquagel - pores are filled with water
b. Xerogel - by the process of evaporation, aqueous phase in the pores are removed
c. Aerogel - solvent removed by supercritical extraction
Aplicación
Silica gel was used on glass plates to perform preparative thin layer chromatography.
Código de clase de almacenamiento
11 - Combustible Solids
Clase de riesgo para el agua (WGK)
nwg
Punto de inflamabilidad (°F)
Not applicable
Punto de inflamabilidad (°C)
Not applicable
Elija entre una de las versiones más recientes:
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
F. Daayf et al.
Plant physiology, 113(3), 719-727 (1997-03-01)
Phenolic compounds extracted from cucumber (Cucumis sativus L.) leaves were separated and analyzed for their differential presence and fungitoxicity in relation to a prophylactic treatment with Milsana (Compo, Munster, Germany) against powdery mildew (Sphaerotheca fuliginea). Based on our extraction and
A simple method for production of pure silica from rice hull ash
Kalapathy, U., A. Proctor, and J. Shultz.
Bioresource Technology, 73, 257-262 (2000)
Silica gel supported zirconocene dichloride/methylalumoxane catalysts for ethylene polymerization: Effects of heterogenation on activity, polymer microstructure and product morphology.
Janiak, Christoph, and Bernhard Rieger.
Angew. Makromol. Chem., 215, 47-57 (1994)
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico