SW19A47HH3

Milligard^® 1.2 µm, OptiScale^® Capsule

filtration area 17.7 cm², OptiScale^® 47, pore size 1.2 μm

• Sinónimos: Optiscale Capsule Filter Milligard 1.2 μm 1/4 in. HB/HB
• Código UNSPSC: 23151806
• eCl@ss: 32031690

Propiedades

• Materiales: PVDF vent cap; fluoroelastomer FKM seal; mixed cellulose esters (MCE) ; polycarbonate ; polypropylene support
• Nivel de calidad: 400
• cumplimiento norm.: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• esterilidad: non-sterile
• Compatibilidad de esterilización: autoclavable compatible
• Línea del producto: OptiScale^® 47
• Características: hydrophilic
• fabricante / nombre comercial: OptiScale^®
• Parámetros: 25 °C max. inlet temp.; 5.5 bar max. inlet pressure (80 psi) at 25 °C; 80 psig max. inlet pressure
• técnicas: prefiltration: suitable
• Diámetro: 6.9 cm (2.7 in.)
• filtración área: 17.7 cm²
• diám. conexión a entrada: 1/4 in.
• diám. conexión a salida: 1/4 in.
• impurezas: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• matriz: Milligard^®
• tamaño de poro: 1.2 μm nominal pore size; 1.2 μm pore size
• Adaptador: inlet hose barb; outlet hose barb; (6 mm (1/4 in.) Hose Barb Inlet and Outlet)

Descripción

Descripción general

Device Configuration: Capsule

Características y beneficios

Format: Single Layer

Otras notas

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Bacterial
• Mode of Action: Filtration (size exclusion)
• Application: Protein purification
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation and wetting sections of OPTISCALE^®-25 user guide
• Storage Statement: Please refer OPTISCALE^®-25 user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Nota de preparación

Sterilization Method
3 autoclave cycles of 60 min @ 121 °C; not in-line steam sterilizable

Nota de análisis

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

Información legal

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

Información de seguridad

• Código de clase de almacenamiento: 11 - Combustible Solids
• Clase de riesgo para el agua (WGK): WGK 2