PCC030C05C

Pellicon^® Capsule with Ultracel^® Membrane

pore size 30 kDa, C Screen, size 0.5 m² , with AseptiQuik^® G connectors

• Código UNSPSC: 41104903

Propiedades

• Materiales: EPDM rubber seal; PPO/PS blend (core); PPO/PS blend housing (PPO/PS Blend); TPE seal; Ultracel^® membrane; composite regenerated cellulose (CRC) membrane; epoxy adhesive; polyester screen; polypropylene screen; polyurethane adhesive
• Nivel de calidad: 400
• esterilidad: sterile; γ-irradiated
• Línea del producto: Pellicon^®
• condiciones de almacenamiento: room temperature (15-30°C)
• Parámetros: 4-8 L/min-m² flow rate (Feed); 50 psi max. transmembrane pressure (3.5 bar) at 4-30 °C (Forward); 75 psi max. inlet pressure (5.1 bar) at 4-30 °C
• técnicas: ultrafiltration: suitable
• Longitud: 41.1 cm (16.2 in.)
• Diámetro: 5.7 cm (2.3 in.)
• filtración área: 0.5 m²
• pantalla tamaño: , Type C screen (coarse screen)
• tamaño: 0.5 m² , with AseptiQuik^® G connectors
• volumen: 119 mL , in feed channel; 149 mL , in permeate channel
• impurezas: ≤5 ppm Meets TOC (in retentate effluent, after a WFI flush of 20 L/m²)
• matriz: Ultracel^®
• tamaño de poro: 30 kDa
• intervalo de pH: 2-13
• Adaptador: inlet/outlet connection (Feed: AseptiQuik^® G Connector); inlet/outlet connection (Permeate: AseptiQuik^® G Connector); inlet/outlet connection (Retentate: AseptiQuik^® G Connector)

Descripción

Descripción general

The Pellicon^® Capsule is the first of its kind -- a true single-use TFF device that comes ready to process in minutes. Self-contained, it employs an easy-to-use, holderless format and is supplied sterilized by irradiation.

Aplicación

Concentration, Diafiltration, Buffer exchange, Protein purification

Características y beneficios

Plug ′n play, holderless design - easy to install, safe to remove
Gamma sterilized and preseravtive-free - ready to process in minutes
True single-use, self-contained capusle - fast, safe, and flexible batch turnaround
Proven Ultracel^® membrane and C screen - high recovery, superior mass transfer, solvent resistance
Pellicon^® TFF proven performance - true linear scalability within Pellicon^® TFF families

Envase

A foam pouch is inserted over the end caps on both ends of the capsule which is then double-bagged and vacuum sealed. The double-bagged capsule is then placed on a tray and individually boxed.

Otras notas

The Emprove^® Program complements the product portfolio through

Comprehensive documentation to support qualification, risk assessment and process optimization needs.
Consolidation of product specific testing, quality and regulatory information to simplify compliance requirements.
Convenient 24/7 access to up-to-date product information.

Información legal

AseptiQuik is a registered trademark of Colder Products Company

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany