KN1HA3TTT1

Opticap^® XLT30 Polygard^®

inlet connection diam. 1.5 in., pore size 10.0 μm, cartridge nominal length 30 in. (75 cm)

• Sinónimos: Polygard -CN Opticap XLT 30 in. 10.0 μm 1.5 in. TC/TC
• Código UNSPSC: 23151806
• eCl@ss: 32031690

Propiedades

• Materiales: polypropylene
• Nivel de calidad: 400
• cumplimiento norm.: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• fabricante / nombre comercial: Opticap^®
• Parámetros: 25 °C max. inlet temp.; 80 psig max. inlet pressure
• longitud nominal del cartucho: 30 in. (75 cm)
• diám. conexión a entrada: 1.5 in.
• diám. conexión a salida: 1.5 in.
• impurezas: <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• extraíbles gravimétricos: ≤165 mg/capsule
• matriz: Polygard^®-CN
• tamaño de poro: 10.0 μm nominal pore size; 10.0 μm pore size
• entrada: sample type liquid
• Adaptador: inlet sanitary flange; outlet sanitary flange

Descripción

Descripción general

Device Configuration: Capsule

T-line/Gauge Port: T-line

Otras notas

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Microorganism reduction
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation section of OPTICAP^® XL Capsules and OPTICAP^® XLT Capsules user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Nota de análisis

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Información legal

OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany