GVHP01300
Membrana de filtración MF-Millipore, tamaño de poro 0,22 μm
Durapore®, filter diam. 13 mm, hydrophobic
Sinónimos:
Durapore® Membrane Filter, 0.22 µm
About This Item
Productos recomendados
Materiales
PVDF membrane
plain filter
white filter
Nivel de calidad
esterilidad
non-sterile
Características
hydrophobic
fabricante / nombre comercial
Durapore®
Millipore
Parámetros
≥16 mL/min-cm2 air flow rate ((Gurley))
>1 mL/min-cm2 water flow rate (at 25inches Hg with methanol prewet)
85 °C max. temp.
diám. del filtro
13 mm
grosor
125 μm , typical
extraíbles gravimétricos
0.5%
índice de refracción
n/D 1.42
Matriz
Durapore®
tamaño de poro
0.22 μm pore size
≥65 % porosity
capacidad
150 μg/cm2
punto de burbuja
≥18 psi (1.24 bar), air with methanol
Condiciones de envío
ambient
¿Está buscando productos similares? Visita Guía de comparación de productos
Categorías relacionadas
Descripción general
Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery
Aplicación
- Air sterilization
- Gas sterilization
- Solvent filtration
Otras notas
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 μm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 μm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Información legal
Certificados de análisis (COA)
Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Los clientes también vieron
Artículos
Learn about membranes filters and considerations in membrane selection including chemical compatibility, pore size and MWCO, binding and optical properties, and extractables for protein and small molecule analyte sample preparation, HPLC, LC-MS, and other analyses.
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico