CWSS74S03

Milligard^® 0,5/ 0,2 µm nominal, Cartucho

pore size 0.5/0.2 μm, cartridge nominal length 40 in. (100 cm)

• Sinónimos: Milligard Cartridge Filter 40 in. Code 7 0.2 μm
• Código UNSPSC: 23151806
• eCl@ss: 32031610

Propiedades

• Materiales: mixed cellulose esters (MCE) membrane; polyester support; polypropylene ; silicone seal
• Nivel de calidad: 400
• cumplimiento norm.: meets EU framework regulation [1935/2004/EC] (all component materials; regarding materials and articles intended to contact food); meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• esterilidad: non-sterile
• Compatibilidad de esterilización: autoclavable compatible; steam-in-place compatible
• Línea del producto: Milligard^®
• Características: hydrophilic
• fabricante / nombre comercial: Milligard^®
• Parámetros: 3.5 bar max. differential pressure (50 psid) at 25 °C; 3.5 bar max. inlet pressure (50 psi) at 25 °C
• técnicas: prefiltration: suitable
• Longitud: 40 in.
• Anchura: 2.7 in.
• longitud nominal del cartucho: 40 in. (100 cm)
• Diámetro: 7.1 cm (2.8 in.)
• filtración área: 2.8 m²
• impurezas: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• extraíbles gravimétricos: ≤200 mg/cartridge
• matriz: Milligard^®
• pore size: 0.5/0.2 μm nominal pore size; 0.5/0.2 μm pore size
• entrada: sample type liquid
• código del cartucho: Code 7

Descripción

Descripción general

Device Configuration: Cartridge

Características y beneficios

Format: Double Layer

Envase

Double Easy-Open bag

Otras notas

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use:

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to the installation and wetting sections of OptiScale^®-25 user guide and introduction section of the Mixed cellulose esters Tech Brief
• Storage Statement: Please refer to the Mixed cellulose esters Tech Brief
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Especificaciones

Filter Grade: Standard Milligard^® Media

Nota de preparación

Sterilization Method
10 autoclave cycles or SIP @ 121 °C for 30 min

This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Nota de análisis

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥3 L

Información legal

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

Información de seguridad

• Pictogramas: GHS02
• Palabra de señalización: Danger
• Frases de peligro: H228
• Consejos de prudencia: P210 - P240 - P241 - P280 - P370 + P378
• Clasificaciones de peligro: Flam. Sol. 1
• Código de clase de almacenamiento: 11 - Combustible Solids
• Clase de riesgo para el agua (WGK): WGK 2