CTGR03TP1

Aervent^® 0,2 µm, cartucho

pore size 0.2 μm, cartridge nominal length 30 in. (76 cm), Code 0 (2-222; O-rings)

• Sinónimos: Aervent CTGR Cartridge Filter 30 in. 0.2 µm Code 0
• Código UNSPSC: 23151806
• eCl@ss: 32031690

Propiedades

• Materiales: PTFE ; polypropylene ; polypropylene support; silicone seal
• Nivel de calidad: 400
• esterilidad: non-sterile
• Compatibilidad de esterilización: steam-in-place compatible
• Línea del producto: Aervent^®
• Características: hydrophobic
• fabricante / nombre comercial: Aervent^®
• Parámetros: ≤72 mL/min nitrogen diffusion at 970 mbar (14 psig) and 23 °C (in 70/30% IPA/water); 1.7 bar max. inlet pressure (25 psi) at 80 °C; 1.8 bar max. differential pressure (25 psid) at 80 °C (Forward); 4.1 bar max. differential pressure (60 psid) (Reverse; intermittent); 4.1 bar max. inlet pressure (60 psi) (Reverse; Intermittent); 5.5 bar max. differential pressure (80 psid) at 25 °C (Forward); 5.5 bar max. inlet pressure (80 psi) at 25 °C (Forward)
• técnicas: gas filtration: suitable
• Longitud: 30 in.
• Anchura: 2.7 in.
• longitud nominal del cartucho: 30 in. (76 cm)
• Diámetro: 6.9 cm (2.7 in.)
• filtración área: 1.95 m²
• impurezas: <0.25 EU/mL USP bacterial endotoxins (LAL test, aqueous extraction)
• extraíbles gravimétricos: ≤105 mg/cartridge
• matriz: Aervent^®
• tamaño de poro: 0.2 μm pore size
• entrada: sample type gas
• punto de burbuja: ≥1100 mbar (16 psig), nitrogen with 70/30% IPA/water at 23 °C
• código del cartucho: Code 0 (2-222; O-rings)

Descripción

Descripción general

Device Configuration: Cartridge

Características y beneficios

Rated for aerosol retention of a total challenge of 108–1010 plaque forming units of ΦX-174 virus particles at 85 Nm3/h (50 SCFM) per cartridge.

Envase

Double Easy-Open bag

Calidad

Retains Brevundimonas diminuta liquid aerosol for 21 days at a minimum challenge of 10⁷ CFU/cm²

Nota de preparación

Sterilization Method
150 (100 forward/50 reverse) SIP cycles of 30 min @ 145 °C

This product was manufactured with a PTFE membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Nota de análisis

Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM^® F838 methodology.

Gravimetric Extractables: after 24 hours in a 70/30% IPA/water mixture at controlled room temperature

HydroCorr: ≤2.3 mL/min @ 2.6 bar (38 psig) per 30 in cartridge

Otras notas

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Información legal

AERVENT is a registered trademark of Merck KGaA, Darmstadt, Germany

ASTM is a registered trademark of American Society for Testing and Materials