1.52270

Chromolith^® WP 300 RP-18 (monolithic) HPLC Columns

L × I.D. 100 mm x 4.6 mm HPLC Column

• Sinónimos: Chromolith^® WP 300 RP-18 100-4.6 HPLC column
• Código UNSPSC: 41115700
• NACRES: SB.52

Propiedades

• product name: Chromolith^® WP 300 RP-18, L × I.D. 100 mm x 4.6 mm HPLC column
• Materiales: PEEK column
• Nivel de calidad: 100
• Agency: suitable for USP L1
• Línea del producto: Chromolith^®
• Características: endcapped: no; endcapped: no
• envase: 1 ea of
• Extensión del etiquetado: 18% Carbon loading; 18% loading
• Parámetros: 200 bar pressure; 200 bar pressure; 60 °C max. temp.; 60 °C max. temp.
• técnicas: HPLC: suitable; HPLC: suitable; LC/MS: suitable; mass spectrometry (MS): suitable (High); mass spectrometry (MS): suitable
• columna L × D.I.: 10 cm × 4.6 mm
• superficie: 300 m²/g
• matriz: monolithic silica; monolithic silica
• grupo activo de la matriz: C18 bonding phase; C18 bonding phase
• tamaño de poro: 2 μm macroporosity; 2 μm macroporosity; 30 mm mesoporosity; 30 nm mesoporosity
• operating pH range: 1.5-7.5; 2-7.5
• técnica de separación: reversed phase
• temp. de almacenamiento: no temp limit

Descripción

Descripción general

Biotherapeutics, for example, bio-engineered drugs and peptide therapeutics, represent the promise of new medical treatments for the future. Production costs have been falling leading to extremely high demand for suitable analytical methods for process monitoring and quality control of these biomolecules. HPLC is the preferred method of analysis, and it is therefore important to use the right column for these larger molecules.

Accurate analysis of proteins, antibodies, and large peptides requires columns with good permeability, along with better mass transfer and selectivity. In order for size-exclusion not to influence the separation, the pore size should be approximately ten times larger than the molecule being analyzed.

Chromolith columns have shown great potential and superiority in comparison to standard silica. Chromolith^® WP 300 columns are made of monolithic silica with a characteristic bimodal pore structure.

Chromolith^® WP 300 RP-18 columns have macropores with 2 μm diameter, giving a column efficiency exceeding 80,000 plates/meter. The mesopores are 30 nm (300 Å), and the surface modification is Octadecylsilane.

Chromolith^® WP 300 RP-18 columns fall under the USP L1 Classification. The column efficiency is comparable to a 5 μm particle size fully porous particulate column. Chromolith^® WP 300 RP-18 columns are suitable for LC-MS applications.The column dimension of 100 mm in length and 4.6 mm I.D. is the best choice for fast separations of Biomolecules on any HPLC System.Chromolith^® WP 300 RP-18 100-4.6 HPLC columns enable:

• Completely bioinert column hardware and high biorecovery
• High-speed separations at very low column back-pressure
• High matrix tolerance, allowing time and cost savings with simplified workflows
• Cost savings due to extended column lifetimes
• Connection of columns, flow gradients, and the use of mobile phases with higher viscosity

The recommended Guard-columns are: Chromolith^® WP 300 RP-18, 5-4.6 guard cartridges (3 pieces) [1.52273] with the Chromolith^® Guard Cartridge Holder Bioinert 5 mm x 4.6 mm [1.52255]Or Chromolith^® WP 300 RP-18 10-4.6 guard cartridges (3 pieces) [1.52272] with the Chromolith^® Guard Cartridge Holder Bioinert 10 mm x 4.6 mm [1.52256]. The Chromolith^® column coupler can be used to significantly increase the separation efficiency of Chromolith^® columns by coupling several columns in series. [1.51467] Learn more: Brochure: Race through your Separations on Any System. Chromolith^® Monolithic Silica HPLC Columns. Chromolith^® WP 300 RP-18 columns are also available with 2 mm inner dimension. Flyer: Rapid and Robust Protein Chromatography - Chromolith^® WP 300 RP-18 2 mm I.D. HPLC Columns. All Supelco HPLC Columns, including monolithic Chromolith^® columns, are fully compatible to all HPLC and UHPLC Instruments. Supelco HPLC Products: The Best Choice for Any LC Instrument

Información legal

Chromolith is a registered trademark of Merck KGaA, Darmstadt, Germany