1.16882

Fractogel^® EMD SO₃ ⁻ (M) Resin

• Sinónimos: Fractogel^® EMD SO₃⁻ (M)
• Código UNSPSC: 41115711

Propiedades

• Nivel de calidad: 400
• ligand: (Sulfoisobutyl)
• descripción: strong cation exchanger, suspension in 20% ethanol and 150 mM NaCl (40-90 µm)
• esterilidad: sterile (Caustic Stable)
• Línea del producto: Fractogel^®
• formulario: resin
• analitos específicos: MAbs
• Parámetros: 8 bar max. pressure
• grupo activo de la matriz: methacrylate
• tamaño medio de partícula: 40-90 μm
• capacidad: 130 mg binding capacity (lysozyme/ml of resin)
• temperatura de transición: flash point 35 °C (Does not sustain combustion.)
• densidad: 1.43 g/cm³ at 20 °C
• densidad aparente: 1000 kg/m³
• aplicaciones: recombinant protein; vaccine development
• técnica de separación: cation exchange; strong cation exchange
• temp. de almacenamiento: 2-30°C

Descripción

Descripción general

Strong cation exchange Fractogel^® resin featuring the tentacle technology, for purification of basic and neutral proteins (e.g. antibodies) and peptides

Características y beneficios

Fractogel^® EMD SO₃^- (M) enables:

• Increased binding strength at low pH
• High aggregate removal efficiency combined with high dynamic binding capacity
• Lower elution volumes for the highest purity levels
• Compatibility with 2.5 % (v/v) aqueous benzyl alcohol containing 150 mM NaCl storage solution

Due to the titration behavior, the ion exchange capacity can be used from pH 2 to pH 12. The separation of proteins is based on reversible electrostatic interactions between the surface′s positively charged regions and the support. Proteins are retained efficiently on Fractogel^® EMD SO₃^- (M) when the pH of the buffer is about 1 unit below their isoelectric points (pl).

The strength of the binding depends on the following:

• the buffer system
• pH value of the buffer which determines the surface charge of the protein
• the concentration of the counter ions
• the charge density on the support (protein binding capacity)

Envase

• 1.16882.0100: Fractogel^® EMD SO3- (M) Resin 100ml
• 1.16882.0010: Fractogel^® EMD SO3- (M) Resin 10ml
• 1.16880.0500: Fractogel^® EMD SO3- (M) Resin 500ml
• 1.16882.5000: Fractogel^® EMD SO3- (M) Resin 5L

Plastic bottle

Nota de análisis

Appearance: Milky turbid suspension,free from impurities(foreign particles)
Microscopic evaluation: Uniform spherical particles,no agglomerates, no fines
Extractable matter (water): ≤ 0.05 %
Cerium: ≤ 1 µg/g
Pressure drop(column: ID=1.6 cm, L=10 cm at 5 ml/min): ≤ 1.0 bar
Particle size (d10): 37 - 45 µm
Particle size (d50): 48 - 60 µm
Particle size (d90): 63 - 77 µm
Colony forming units (TAMC + TYMC): ≤ 100 CFU/ml
Endotoxins: ≤ 1.00 EU/ml
Protein binding capacity (lysozyme): 110 - 150 mg/ml
Functional test (b:a): ≤ 0.4
Functional test (c:d): ≤ 0.45
Functional test: Separation chymotrypsinogen A, cytochrom C and lysozyme

Información legal

FRACTOGEL is a registered trademark of Merck KGaA, Darmstadt, Germany

Información de seguridad

• Pictogramas: GHS02
• Palabra de señalización: Warning
• Frases de peligro: H226
• Consejos de prudencia: P210 - P233 - P240 - P241 - P242 - P243
• Clasificaciones de peligro: Flam. Liq. 3
• Código de clase de almacenamiento: 3 - Flammable liquids
• Clase de riesgo para el agua (WGK): WGK 1
• Punto de inflamabilidad (°F): 95.0 °F
• Punto de inflamabilidad (°C): 35 °C