1.00808

Titanium(IV) oxide

for analysis EMSURE^® Reag. Ph Eur

• Sinónimos: Titanium(IV) oxide, Titanic anhydride, Titanium dioxide
• Fórmula empírica (notación de Hill): O₂Ti
• Número de CAS: 13463-67-7
• Peso molecular: 79.87
• Número MDL: MFCD00011269
• Código UNSPSC: 12352303
• Número índice de la CE: 236-675-5
• NACRES: NA.21

Propiedades

• Agency: reag. Ph. Eur.
• Nivel de calidad: 300
• Línea del producto: EMSURE^®
• Análisis: ≥99.0% dry basis (cerimetric); 98.0-100.5% (cerimetric)
• formulario: powder
• potencia: >10000 mg/kg LD₅₀, oral (Rat)
• impurezas: ≤0.5% Substances soluble in dilute hydrochloric acid; ≤0.5% Substances soluble in water
• pérdida: ≤ 0.5% loss on drying, 105 °C; 3 h
• pH: 7-8 (20 °C, 100 g/L in H₂O, slurry)
• bp: 2900 °C/1013 hPa
• mp: 1855 °C
• densidad aparente: 850 kg/m³
• trazas de catión: As: ≤0.0001%; Ba: ≤0.0020%; Fe: ≤0.005%; Pb: ≤0.0005%; Sb: ≤0.0020%; Zn: ≤0.005%
• temp. de almacenamiento: 2-30°C
• InChI: 1S/2O.Ti
• Clave InChI: GWEVSGVZZGPLCZ-UHFFFAOYSA-N

Descripción

Aplicación

• Sulfanyl Porphyrazines with Morpholinylethyl Periphery-Synthesis, Electrochemistry, and Photocatalytic Studies after Deposition on Titanium(IV) Oxide P25 Nanoparticles.: This study presents the synthesis and characterization of sulfanyl porphyrazines with morpholinylethyl peripherals. These compounds were deposited on Titanium(IV) oxide nanoparticles and evaluated for their photocatalytic properties, indicating potential applications in environmental photocatalysis and organic synthesis (Koczorowski et al., 2021).


• Gold-titanium(IV) oxide plasmonic photocatalysts prepared by a colloid-photodeposition method: correlation between physical properties and photocatalytic activities.: This research discusses the development of gold-Titanium(IV) oxide plasmonic photocatalysts using a colloid-photodeposition method. It explores the correlation between their physical properties and enhanced photocatalytic activities, suggesting applications in solar energy conversion and environmental remediation (Tanaka et al., 2012).


• Size-selective photocatalytic reactions by titanium(IV) oxide coated with a hollow silica shell in aqueous solutions.: This paper explores the use of Titanium(IV) oxide coated with hollow silica shells for size-selective photocatalytic reactions. The unique structural properties of these composites allow for selective photocatalytic degradation of organic pollutants in water, providing a novel approach to water purification (Ikeda et al., 2007).


• Photocatalytic activity of neat and silicon-doped titanium(IV) oxide nanofibers prepared by combined sol-gel and electrospinning techniques.: Investigates the photocatalytic performance of silicon-doped Titanium(IV) oxide nanofibers. These nanofibers show enhanced photocatalytic activity due to increased surface area and modified electronic properties, making them effective for pollution control and solar energy applications (Watthanaarun et al., 2007).


• Enhanced photocatalysis of pentachlorophenol by metal-modified titanium (IV) oxide.: Focuses on the photocatalytic degradation of pentachlorophenol using metal-modified Titanium(IV) oxide. The study demonstrates that the modification with metals significantly enhances the photocatalytic efficiency, offering a potent method for the detoxification of hazardous organic compounds in environmental applications (Lin et al., 2006).

Ligadura / enlace

Replaces: TX0685; TX0685-2

Nota de análisis

Assay (cerimetric): 98.0 - 100.5 %
Assay (cerimetric, calculated on dried substance): ≥ 99.0 %
Identity: passes test
Appearance of solution: passes test
Substances soluble in water: ≤ 0.5 %
Substances soluble in dilute hydrochloric acid: ≤ 0.5 %
Acidity or alkalinity: passes test
As (Arsenic): ≤ 0.0001 %
Ba (Barium): ≤ 0.0020 %
Fe (Iron): ≤ 0.005 %
Pb (Lead): ≤ 0.0005 %
Sb (Antimony): ≤ 0.0020 %
Zn (Zinc): ≤ 0.005 %
Loss on drying (105 °C; 3h): ≤ 0.5 %

Información legal

EMSURE is a registered trademark of Merck KGaA, Darmstadt, Germany

Información de seguridad

• Código de clase de almacenamiento: 13 - Non Combustible Solids
• Clase de riesgo para el agua (WGK): nwg
• Punto de inflamabilidad (°F): Not applicable
• Punto de inflamabilidad (°C): Not applicable