Z568848

Ace pressure tube

bushing type, Front seal, capacity 210 mL, L × O.D. 30.5 cm × 38.1 mm

• Código UNSPSC: 41121800
• NACRES: NB.11

Propiedades

• Materiales: PTFE cap; borosilicate glass tube; colorless tube; round bottom; screw top cap (plugseal); white cap
• esterilidad: non-sterile
• Características: bushing type Front seal; graduations: no; internal thread
• fabricante / nombre comercial: Ace Glass 8648-115
• L × D.E.: 30.5 cm × 38.1 mm
• capacidad: 210 mL
• Diámetro: 38.1 mm
• Adaptador: Ace-Thred for #25
• tipo de unión: non-treated surface

Descripción

Descripción general

Heavy-wall borosilicate glass tubes are pressure rated to 150 psig. Useful for the polymerization and analysis of halogens by thermal decomposition in the presence of lime. Tubes are supplied complete with Ace-Thred PTFE bushing and FETFE^® O-ring.

For pressure work, the "Front seal" bushing is recommended (allows O-ring to sit at narrow neck of tube, below the threads). "Back seal" bushing can also be used, if preferred (allows O-ring to sit on top of the tube against cap).

Replacement FETFE O-rings:

Front Seal:
Z504661 (Ace-Thred #7)
Z504858 (Ace-Thred #15)
Z505056 (Ace-Thred #25)

Back Seal:
Z504742 (Ace-Thred #7)
Z505021 (Ace-Thred #15)
Z505110 (Ace-Thred #25)

CAUTION: This glassware is not guaranteed against breakage caused by pressure or vacuum. These tubes should never be used if scratched or otherwise damaged.

Información legal

FETFE is a registered trademark of Ace Glass, Inc.