CLS1396100

Pyrex^® square media storage bottle

with screw cap, capacity 100 mL

• Sinónimos: Pyrex^® media bottles, glass media bottles, media bottle, pyrex bottles
• Código UNSPSC: 41121800
• NACRES: NB.43

Propiedades

• Materiales: borosilicate glass bottle; clear bottle; orange polypropylene cap (plug seal); square bottle; wide-mouth bottle
• esterilidad: non-sterile
• Características: autoclavable; cap; disposable; graduations; subdivision 20 mL
• envase: case of 10 ea; pack of 10 ea
• fabricante / nombre comercial: Corning 1396-100
• D.E. × Al: 50 mm × 105 mm
• capacidad: 100 mL
• Adaptador: GL 32 neck thread

Descripción

Descripción general

Square bottles are easier to handle, require less space (13-20%) on the shelf or in the autoclave and are ideal for mixing, sampling and storage. Features include white enamel graduations, large marking spot and a glass ridge molded into the bottle to indicate full capacity. They include a linerless, one-piece autoclavable orange polypropylene plug seal cap and a drip-free pouring ring

These heavy duty 100mL square bottles are manufactured from PYREX borosilicate glass for chemical and thermal resistance. Square bottles are easier to handle, require less space (13-20%) on the shelf or in the autoclave and are ideal for mixing, sampling and storage. Features include white enamel graduations, large marking spot and a glass ridge molded into the bottle to indicate full capacity. Bottles include a linerless, one-piece autoclavable orange GL32 threaded polypropylene plug seal cap and a drip-free pouring ring. -Caution: Square bottles should NOT be used with bottle top filter units, or in other applications involving vacuum pressure, as breakage may occur. DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage. -A wide range of optional caps are available for these bottles: -Polypropylene colored caps for ease of sorting and identification. -Vented membrane cap with 0.22 μm PTFE hydrophobic membrane. -PBT (polybutylene terephthalate) solid caps and ETFE pouring rings for dry heat sterilization (180°C). -PBT caps with silicone septa for syringe sampling or introduction of reagents.

Información legal

PYREX is a registered trademark of Corning, Inc.