CLS139550

Pyrex^® round media storage bottles and reusable screw caps

capacity 50 mL

• Sinónimos: Pyrex^® media bottles, glass media bottles, laboratory bottles, plastic bottle, plastic bottles, round bottles, storage bottle
• Código UNSPSC: 41121800
• NACRES: NB.43

Propiedades

• Materiales: borosilicate glass bottle; clear bottle; cylindrical bottle; narrow-mouth bottle; orange polypropylene cap (plug seal)
• esterilidad: non-sterile
• Características: autoclavable; cap; graduations; reusable
• envase: case of 10
• fabricante / nombre comercial: Corning 1395-50
• disponibilidad: not available in EU
• capacidad: 50 mL
• diám. × Al: 46 mm × 88 mm
• Adaptador: GL 32 neck thread

Descripción

Descripción general

Pyrex heavy-duty round media storage bottles can be used for storage as well as for mixing and sampling. These media storage bottles Include linerless, one-piece, autoclavable, orange PP plug-seal caps with drip-free pouring rings. Optional red PBTP caps and red ETFE pouring rings are available separately, for dry heat sterilization (180°C).

Pyrex round media storage bottles are made of borosilicate glass with permanent, white enamel graduations and marking spots.

Caution: Bottles larger than 2 L should NOT be used with bottle-top filter units or in other applications involving vacuum/pressure, as breakage may occur. DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage.

A wide range of optional caps are available for these bottles:

• Vented membrane cap with 0.22 μm PTFE hydrophobic membrane
• Red PBT (polybutylene terephthalate) solid caps and ETFE pouring rings for dry heat sterilization (180°C)
• PBT caps with silicone septa for syringe sampling or introduction of reagents

These heavy duty 50 mL PYREX round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL32 threaded cap and a drip-free pouring ring. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). Bottles have permanent white enamel graduations and marking spots.

Caution: DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage.

Información legal

PYREX is a registered trademark of Corning, Inc.