915327

Aquivion^® pellets P87-SO₂F

cylindrical pellets 2mm, PFSF eq. wt. (870 g/mole SO₂F)

• Sinónimos: Aquivion^® SO₂F-form, Ethanesulfonyl fluoride, Perfluoro(3-oxa-4-pentenesulfonyl fluoride)-tetrafluoroethylene copolymer
• Fórmula lineal: [CF₂CF(OCF₂CF₂SO₂F)]_m[CF₂CF₂]_n
• Número de CAS: 69462-70-0
• Código UNSPSC: 60104509

Propiedades

• formulario: pellets

Descripción

Descripción general

Aquivion^® P87S-SO₂F are pellets based on the short-side-chain (SSC) copolymer of Tetrafluoroethylene and the Sulfonyl Fluoride Vinyl Ether (SFVE) CF₂=CF₂-O-(CF₂)₂-SO₂F industrially produced by Solvay Specialty Polymers. The resulting perfluoropolymer′s functional groups are in their sulfonyl fluoride form, SO₂F.

Aplicación

• Aquivion^® P87 pellets can be melt-pressed or extruded into plates, sheets or thin films down to about 50μm. The extruder shall be equipped with a standard three-zone metering screw devoid of barrier or mixing elements. Optimum temperature settings will depend on the configuration of the equipment but generally cover 100 to 300°C range. Optionally functional groups in the molded part are then hydrolyzed in baths or wet benches with a heated base (NaOH, KOH etc), reaction which may take minutes or hours, depending on thickness and conditions.
• Aquivion^® P87 pellets can be directly hydrolyzed as described - either completely or only on their outer surface. This will enable functional activity of the sulfonic acid / sulfonyl salt groups for ion-exchange operations or as acid catalyst.

Información legal

Aquivion is a registered trademark of Syensqo Group

Información de seguridad

• Código de clase de almacenamiento: 11 - Combustible Solids
• Clase de riesgo para el agua (WGK): WGK 3
• Punto de inflamabilidad (°F): Not applicable
• Punto de inflamabilidad (°C): Not applicable