Saltar al contenido
Merck
Todas las fotos(3)

Documentos clave

Ver Toda la documentación

472018

Sigma-Aldrich

Strontium carbonate

≥99.9% trace metals basis

Sinónimos:

Strontium carbonate (SrCO), Strontium monocarbonate 3, Strontium(II) carbonate

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(3)

About This Item

Fórmula lineal:
SrCO3
Número de CAS:
1633-05-2
Peso molecular:
147.63
Número CE:
216-643-7
Número MDL:
MFCD00011250
Código UNSPSC:
12352302
ID de la sustancia en PubChem:
24870778
NACRES:
NA.23

Nivel de calidad

100

Análisis

≥99.9% trace metals basis

formulario

powder

impurezas

≤1000.0 ppm Trace Metal Analysis

densidad

3.7 g/mL at 25 °C (lit.)

cadena SMILES

[Sr++].[O-]C([O-])=O

InChI

1S/CH2O3.Sr/c2-1(3)4;/h(H2,2,3,4);/q;+2/p-2

Clave InChI

LEDMRZGFZIAGGB-UHFFFAOYSA-L

¿Está buscando productos similares? Visita Guía de comparación de productos

Descripción general

Strontium carbonate is a weak base widely used as a starting material in the manufacture of glass cathode ray tubes, colorants in fireworks, phosphors for electroluminescent devices, superconductors, and various Sr-based compounds. It can also be used as a cocatalyst in photocatalytic composites, to expand their photoresponsive range.

Aplicación

Strontium carbonate can be used as a precursor to:
  • Fabricate ceramic composites for n-type thermoelectrics such as SrTiO3–TiO2.
  • Prepare SrCO3/SrO systems for thermochemical energy storage application.

Código de clase de almacenamiento

13 - Non Combustible Solids

Clase de riesgo para el agua (WGK)

nwg

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

Eyeshields, Gloves, type N95 (US)

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCQ9796
MKCP5008
MKCN2186
MKCM4314
MKCM1499

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

M Sadeghi et al.
Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine, 67(1), 7-10 (2008-10-22)
A novel production technique of yttrium-86 based on bombardment of deposited strontium carbonate was investigated. (86)Y was produced via proton-induced reactions on SrCO(3) target that was prepared by the sedimentation method. Production yield of 0.37mCi/microAh at 30 microA was measured
K Sahner et al.
Physical chemistry chemical physics : PCCP, 9(5), 635-642 (2007-01-24)
In the scope of the present contribution, perovskite SrTi(1-x)Fe(x)O(3-delta) was investigated as a model material for conductometric hydrocarbon sensing at intermediate temperatures between 350 and 450 degrees C. To explain the observations made during sensor optimization in a quantitative way
M Sadeghi et al.
Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine, 67(11), 2029-2032 (2008-12-27)
Strontium carbonate deposition on copper substrate was carried out by the sedimentation method in order to produce yttrium-86. Natural strontium carbonate thick layer was prepared with 480 mg SrCO(3), 220 mg ethyl cellulose, and 7.5 mL acetone. This optimum condition
Kai Qiu et al.
Biomaterials, 27(8), 1277-1286 (2005-09-07)
Preparation, characterization and cellular biocompatibility study of a series of calcium polyphosphate containing 0-100 mol% of Ca2+ replaced by Sr2+ were reported. The osteoblastic ROS17/2.8 cell line was used and seeded on the strontium-doped calcium polyphosphate (SCPP) scaffolds to estimate
Guilhem Romieu et al.
Acta biomaterialia, 6(8), 3208-3215 (2010-02-11)
Sterile calcium hydrogenophosphate dihydrate (DCPD) (CaHPO(4).2H(2)O), calcium oxide and strontium carbonate powders were mixed in various liquid phases. Among these, ammonium phosphate buffer (0.75 M, pH 6.9) led to a novel strontium-containing calcium phosphate cement. At a 6/2.5/1.5 M ratio
Ver todos los artículos relacionados

Artículos

Perovskite-Type Oxide Materials

Thermoelectric Performance of Perovskite-type Oxide Materials

Thermoelectric Performance of Perovskite-type Oxide Materials

The prevailing strategies for heat and electric-power production that rely on fossil and fission fuels are having a negative impact on the environment and on our living conditions.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico