Saltar al contenido
Merck
Todas las fotos(2)

Documentos clave

Ver Toda la documentación

441147

Sigma-Aldrich

Polystyrene

average Mw ~350,000, average Mn ~170,000

Sinónimos:

PS

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(2)

About This Item

Fórmula lineal:
[CH2CH(C6H5)]n
Número de CAS:
9003-53-6
Número MDL:
MFCD00084450
Código UNSPSC:
12162002
ID de la sustancia en PubChem:
24867334
NACRES:
NA.23

Formulario

pellets

índice de fusión

2.0-4.0 g/10 min (200°C/5kg)

mol peso

average Mn ~170,000
average Mw ~350,000

fuerza del impacto

21 J/m (Izod, ASTM D 256, 23 °C, notched)

impurezas

≤5% mineral oil

temperatura de transición

Tg 95 °C

densidad

1.04 g/mL at 25 °C

Elongación

ASTM D 638 - 1.5% (at break)

cadena SMILES

c1(ccccc1)C=C

InChI

1S/C8H8/c1-2-8-6-4-3-5-7-8/h2-7H,1H2

Clave InChI

PPBRXRYQALVLMV-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Aplicación

Extrusion molded foamed packaging, dinnerware, bottles and toys. Injection molded packaging containers, toys and disposable cutlery.

Características y beneficios

Hard, clear moderately strong polymer, biologically inert, good dimensional stability. Susceptible to exterior (UV) degradation.

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 3

Equipo de protección personal

dust mask type N95 (US), Eyeshields, Gloves

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCP7904
MKCL2307
MKCH9638
MKCB9723
MKBV4969V

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Slide 1 of 2

1 of 2

Polystyrene analytical standard, for GPC, 90,000

Supelco

327778

Polystyrene

Polypropylene Isotactic, average Mw ~250,000, average Mn ~67,000

Sigma-Aldrich

427888

Polypropylene

Päivi Grönroos et al.
Sensors (Basel, Switzerland), 19(12) (2019-06-30)
Novel hot electron-emitting working electrodes and conventional counter electrodes were created by screen printing. Thus, low-cost disposable electrode chips for bioaffinity assays were produced to replace our older expensive electrode chips manufactured by manufacturing techniques of electronics from silicon or
Dharneedar Ravichandran et al.
Molecules (Basel, Switzerland), 24(22) (2019-11-17)
Polystyrene (PS) polymers have broad applications in protective packaging for food shipping, containers, lids, bottles, trays, tumblers, disposable cutlery and the making of models. Currently, most PS products, such as foams, are not accepted for recycling due to a low
Prasert Akkaramongkolporn et al.
AAPS PharmSciTech, 10(2), 641-648 (2009-05-20)
The differently sulfonated styrene-divinylbenzene cross-linked copolymer cationic exchange resins were prepared by oil-in-water polymerization and varied degrees of sulfonation. Several characteristics of the obtained resins were evaluated, i.e., Fourier transform infrared spectra, the ion-exchange capacity, microscopic morphology, size, and swelling.
Hui Xia et al.
Journal of colloid and interface science, 376(1), 322-326 (2012-03-27)
The aggregation kinetics of particles in dense polystyrene latex suspensions is studied by low-coherence fiber optic dynamic light scattering. Low-coherence fiber optic dynamic light scattering is used to measure the hydrodynamic radius of the aggregates. The aggregation kinetics data obtained
Harikrishnan Narayanan Unni et al.
Electrophoresis, 30(5), 732-741 (2009-03-05)
This study reports a theoretical and experimental study on the irreversible deposition of colloidal particles from electrokinetic microfluidic flow. The electrokinetic particle transport model presented in this study is based on the stochastic Langevin equation, incorporating the electrical, hydrodynamic, Derjaguin-Landau-Verwey-Overbeek
Ver todos los artículos relacionados

Artículos

Electrospinning: An Enabling Technique for Nanostructured Materials

In this article, we discuss issues critical to successful application of the electrospinning technique, including control of individual nanofibers to form secondary structures and assembly of nanofibers into 3D architectures.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico