Saltar al contenido
Merck

229555

Sigma-Aldrich

Cerium(III) fluoride

anhydrous, powder, 99.99% trace metals basis

Sinónimos:

Cerous fluoride

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula lineal:
CeF3
Número de CAS:
Peso molecular:
197.11
Número CE:
Número MDL:
Código UNSPSC:
12352302
ID de la sustancia en PubChem:
NACRES:
NA.23

grado

anhydrous

Análisis

99.99% trace metals basis

formulario

powder

idoneidad de la reacción

reagent type: catalyst
core: cerium

impurezas

≤150.0 ppm Trace Rare Earth Analysis

densidad

6.16 g/mL at 25 °C (lit.)

cadena SMILES

F[Ce](F)F

InChI

1S/Ce.3FH/h;3*1H/q+3;;;/p-3

Clave InChI

QCCDYNYSHILRDG-UHFFFAOYSA-K

¿Está buscando productos similares? Visita Guía de comparación de productos

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 2

Equipo de protección personal

dust mask type N95 (US), Eyeshields, Gloves


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Slide 1 of 1

1 of 1

Hui Zhang et al.
Journal of colloid and interface science, 302(2), 509-515 (2006-08-01)
In this article, we firstly reported on the synthesis and characterization of ultrafine CeF3 nanoparticles (NPs) modified by catanionic surfactant via a reverse micelles-based route. The catanionic surfactant PN was prepared by mixing the di(2-ethylhexyl) phosphoric acid (DEHPA) and primary
G Wu et al.
Guang pu xue yu guang pu fen xi = Guang pu, 20(4), 560-562 (2003-08-30)
The matrix K3AlF6 was prepared with a reaction of mixture of solution K2CO3 upon certain solution of Al(OH)3 plus HF (40%), dehydrating at 100 degrees C and annealing for 48 h at 600 degrees C. A series of phosphors for
Mei Chee Tan et al.
ACS applied materials & interfaces, 2(7), 1884-1891 (2010-06-11)
Bright infrared-emitting nanocomposites of unmodified CeF(3):Yb-Er with polymethyl-methacrylate (PMMA) and polystyrene (PS), which offer a vast range of potential applications, which include optical amplifiers, waveguides, laser materials, and implantable medical devices, were developed. For the optical application of these nanocomposites
A E Ivanov et al.
Meditsinskaia radiologiia, 34(1), 60-65 (1989-01-01)
Macro- and microtopography of the distribution of aspirated colloidal 144CeF3 in autographs of rabbit lung total sections were examined with the help of a monitoring-measuring device "Videoplan" and microcomputer. Quantitative assessment of photoemulsion-blackening areas at the site of radionuclide concentration
Xiongxin Dai et al.
Health physics, 101(2), 144-147 (2011-06-29)
A rapid bioassay method has been developed for the sequential measurements of actinides in human urine samples. The method involves actinide separation from a urine matrix by co-precipitation with hydrous titanium oxide (HTiO), followed by anion exchange and extraction chromatography

Artículos

The rare earth elements impact nearly everyone in the world. All of the people living in advanced technological countries and almost all those living in third world countries utilize the rare earths in their everyday living—the car that one drives (gasoline is refined from oil using rare earth catalysts and catalytic converters reduce the polluting emissions from the automotive exhaust), watching the news on TV (the red and green colors in TV screens), the telephones and computers we use to communicate (the permanent magnets in speakers and disc drives), just to name a few examples.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico