Saltar al contenido
Merck
Todas las fotos(4)

Documentos clave

Ver Toda la documentación

191906

Sigma-Aldrich

Hydroxypropyl cellulose

average Mw ~1,000,000, powder, 20 mesh particle size (99% through)

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(4)

About This Item

Número de CAS:
9004-64-2
Número MDL:
MFCD00132688
Código UNSPSC:
12162002
NACRES:
NA.23

descripción

biological oxygen demand (BOD) 14,000 ppm

Nivel de calidad

100

Formulario

powder

temp. de autoignición

752 °F

mol peso

average Mw ~1,000,000

impurezas

<5 wt. %

tamaño de partícula

20 mesh (99% through)

pH

5.0-8.5

aceite mineral de tensión interfacial

12.5 dyn/cm, 0.1 wt. % in H2O (vs. mineral oil)

viscosidad

1,275-3,500 cP, 1 wt. % in H2O(25 °C, Brookfield, spindle #3) (30 rpm)(lit.)

solubilidad

H2O: insoluble (above 45 °C)
polar organic solvents: soluble

densidad

0.5 g/mL at 25 °C (lit.)

InChI

1S/C12H20N2/c1-5-12(13)11-7-6-10(14(3)4)8-9(11)2/h6-8,12H,5,13H2,1-4H3

Clave InChI

RRHXDYJWVYFMKV-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Categorías relacionadas

Aplicación

  • Thermo-responsive aqueous foams: Hydroxypropyl cellulose has been studied for its properties as a green polymer that can alter its solubility with temperature changes, making it suitable for responsive foam applications (Braunschweig, 2019).
  • Interaction mechanism in aqueous solutions: A study on the interaction between hydroxypropyl cellulose and water in solutions, focusing on the importance of polymer chain length in determining the physical properties of the solutions (Martin-Pastor and Stoyanov, 2020).
  • Corrosion inhibition: Hydroxypropyl cellulose has shown effectiveness as a corrosion inhibitor for aluminium in acidic environments, highlighting its potential in material science and engineering applications (Nwanonenyi et al., 2019).
  • Orally disintegrating films: This application involves the formulation design of hydroxypropyl cellulose films, aiming to enhance the delivery and dissolution profile of pharmaceuticals, making it significant in drug delivery and pharmaceutical sciences (Takeuchi et al., 2018).

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 1

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

Eyeshields, Gloves, type N95 (US)

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCN0594
MKCD5599
MKBC6263V
MKBJ6793V
MKBC6263

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Satomi Onoue et al.
European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences, 46(5), 492-499 (2012-04-14)
The present study was undertaken to develop a solid self-emulsifying drug delivery system of coenzyme Q(10) (CoQ(10)/s-SEDDS) with high photostability and oral bioavailability. The CoQ(10)/s-SEDDS was prepared by spray-drying an emulsion preconcentrate containing CoQ(10), medium-chain triglyceride, sucrose ester of fatty
Alexandre Monteiro et al.
Drug development and industrial pharmacy, 39(2), 266-283 (2012-04-17)
Nanoparticles of BCS Class II drugs are produced in wet stirred media mills operating in batch or recirculation mode with the goal of resolving the poor water-solubility issue. Scant information is available regarding the continuous production of drug nanoparticles via
Maya Fujiwara et al.
Chemical & pharmaceutical bulletin, 60(11), 1380-1386 (2012-11-06)
We evaluated models for predicting spray mist diameter suitable for scaling-up the fluidized bed granulation process. By precise selection of experimental conditions, we were able to identify a suitable prediction model that considers changes in binder solution, nozzle dimension, and
Ranjit M Dhenge et al.
International journal of pharmaceutics, 438(1-2), 20-32 (2012-09-11)
The present work focuses on the study of the progression of granules in different compartments along the length of screws in a twin screw granulator (TSG). The effects of varying powder feed rate; liquid to solid ratio and viscosity of
Hyemin Choi et al.
Journal of pharmaceutical sciences, 101(8), 2941-2951 (2012-05-26)
Living organisms secrete minerals composed of peptides and proteins, resulting in "mesocrystals" of three-dimensional-assembled composite structures. Recently, this biomimetic polymer-directed crystallization technique has been widely applied to inorganic materials, although it has seldom been used with drugs. In this study
Ver todos los artículos relacionados

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico