SLGNX13
Millex® Nylon syringe filter
pore size 0.2 μm, diam. 13 mm, non-sterile, hydrophilic
Synonym(s):
0.2 μm Nylon syringe filter, Millex-GN syringe filter, disposable syringe filter, syringe filter
About This Item
Recommended Products
material
Nylon membrane
polypropylene housing
Quality Level
Agency
suitable for DIN 38407-42
suitable for EPA OTM-45
reg. compliance
suitable for FDA C-010.02
sterility
non-sterile
product line
Millex®
feature
holdup volume≤ 15 μL (after air purge)
hydrophilic
manufacturer/tradename
Millex®
parameter
10 bar max. inlet pressure (150 psi)
18 L/min flow rate
18 mL/min-cm2 water flow rate
45 °C max. temp.
technique(s)
UHPLC: suitable
analytical sample preparation: suitable
H
21 mm
diam.
13 mm
filtration area
0.8 cm2
volume
10 mL
color
purple
pore size
0.2 μm
input
sample type mild organic solution(s)
sample type aqueous solution(s)
sample type organic solution(s)
bubble point
≥3.0 bar, air with water at 23 °C
fitting
female Luer-Lok® inlet
male Luer outlet slip
shipped in
ambient
General description
• Non-sterile Millex syringe filters with hydrophilic nylon membrane are compatible with a broad range of solvents
• Available in 0.20 µm and 0.45 µm pore sizes and two diameters to suit your application needs
• Compatible with both aqueous and organic solutions, providing broad chemical compatibility and flexibility in the lab
• Polypropylene housing, offering a low level of extractables and broad chemical compatibility
Available in Multiple Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NL (-------NL): 100 per pack
SKU ending with TL (-------TL): 100 per pack. These syringe filters have a tube outlet
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 per pack
Applications:
Sample Filtration Prior to UHPLC, HPLC, LC-MS, and Mass Spec; Solvent Filtration; Clarification of Aqueous and Organic Solutions
Specifications
Legal Information
Not finding the right product?
Try our Product Selector Tool.
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Customers Also Viewed
Articles
Validation of Millex® PES syringe filters in PFAS testing of water samples using EPA method 537.1.
Filtration is used in dissolution testing to end the dissolution process and prepare the sample for HPLC analysis. This page discusses the importance of filtration and utility of hydrophilic PTFE Millex® syringe filters in dissolution testing.
This page provides tables that list the products used in promulgated methods for Per- and polyfluoroalkyl substances (PFAS) analysis, organized by method and step for easy reference. As new methods are released, this page will be updated.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service