NIST1255B

Aluminiumlegierung 356

NIST^® SRM^® 1255b

• UNSPSC-Code: 12352311
• NACRES: NA.24

Eigenschaften

• Qualität: certified reference material
• Qualitätsniveau: 100
• Verpackung: pkg of disk
• Hersteller/Markenname: NIST^®
• Format: matrix material

Beschreibung

Allgemeine Beschreibung

Each unit of SRM 1255b contains a disk with a diameter of approximately 6.3 cm and a thickness of 1.9 cm.

SRM 1255B_cert

SRM 1255B_SDS

Anwendung

The SRM is primarily intended for evaluating the method of analyzing elements in aluminum alloys.

Leistungsmerkmale und Vorteile

• Accompanied with certificate documenting NIST-certified massfraction values, expanded uncertainties, and coverage factor (k) for elements in SRM 1255b.
• The certified values are metrologically traceable to the SI derived unit of mass fraction expressed as percent.
• The reference value of chromium is reported as mass fraction value.
• The NIST certificate is provided with expiration certificate, storage, handling, use,and maintenance instructions.

Sonstige Hinweise

Certified for the analytes listed below.
Silicon (Si), Iron (Fe), Copper (Cu), Manganese (Mn), Magnesium (Mg), Nickel (Ni), Zinc (Zn), Titanium A (Ti), Titanium B (Ti), Vanadium A (V), Vanadium B (V), Strontium A (Sr), Strontium B (Sr), Gallium (Ga), Tin (Sn), Lead (Pb)

Reference/Informational value is provided for the following analytes.
Chromium (Cr)

See certificate for values and more details at nist.gov/SRM.

Rechtliche Hinweise

NIST is a registered trademark of National Institute of Standards and Technology

SRM is a registered trademark of National Institute of Standards and Technology

Sicherheitshinweise

• Lagerklassenschlüssel: 13 - Non Combustible Solids
• WGK: WGK 3
• Flammpunkt (°F): Not applicable
• Flammpunkt (°C): Not applicable