MPGL20CB3

Durapore^® 0,22 µm, Millipak^® Kapsel

filtration area 1000 cm², matrix Durapore^®

• Synonym(e): Gamma Compatible Millipak -200 Filter Unit 0.22 μm 1/4 in. NPTM
• UNSPSC-Code: 23151806

Eigenschaften

• Materialien: PVDF ; PVDF vent cap; polycarbonate ; polycarbonate support
• Qualitätsniveau: 400
• Sterilität: irradiated; non-sterile
• Kompatibilität mit Sterilisationsverfahren: gamma compatible
• Produktlinie: Millipak^®
• Leistungsmerkmale: gamma compatible; hydrophilic
• Hersteller/Markenname: Millipak^®
• Parameter: 0.35 bar max. differential pressure (5 psid) at 123 °C (Forward); 0.7 bar max. differential pressure (10 psid) at 25 °C (Reverse); 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward); 100 L process volume; 18 L/min flow rate at 3.0 bar (ΔP); 4.1 bar max. differential pressure (60 psid) at 25 °C (Forward); 5.2 bar max. inlet pressure (75 psi) at 25 °C
• Methode(n): sterile filtration: suitable
• Länge: 6.0 in.
• Breite: 3.0 in.
• Durchmesser: 7.6 cm (3.0 in.)
• Filtrationsfläche: 1000 cm²
• Durchm. Einlassanschluss: 1/4 in.
• Durchm. Auslassanschluss: 1/4 in.
• Verunreinigungen: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• Gravimetrisch bestimmte extrahierbare Substanzen: ≤5 mg/device
• Matrix: Durapore^®
• Porengröße: 0.22 μm
• Blasenpunkt: ≥3450 mbar (50 psig), air with water at 23 °C
• Fitting: NPT inlet connection; NPT outlet connection; (6 mm (1/4 in.) NPTM Inlet and Outlet)

Beschreibung

Allgemeine Beschreibung

Device Configuration: Filtereinheit

Number of stacked discs: 200 discs

Verpackung

Double Easy-Open bag

Sonstige Hinweise

Diese Produkte werden in einem Werk hergestellt, das den GMP-Richtlinien der FDA entspricht.

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Wetting Instructions for Filter Units with Durapore^® Membrane user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Angaben zur Herstellung

Sterilization Method
3 autoclave cycles of 90 min @ 123°C; not in-line steam sterilizable

This product was manufactured with a Durapore^® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Hinweis zur Analyse

Bacterial Retention
Quantitative Rückhaltung von Brevundimonas diminuta bei einer Mindestbeaufschlagung von 1 x 10⁷ KBE/cm² unter Anwendung der ASTM^® F838-Methode.

Erfüllt die Anforderungen des USP-Tests auf oxidierbare Substanzen nach Durchspülen mit ≥200 ml Wasser

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Rechtliche Hinweise

ASTM is a registered trademark of American Society for Testing and Materials

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany