KGW3A02TT3

Polysep^™ II, 1,0/0,2 µm nominal, Opticap^®-XL-Kapsel

Opticap^® XL 2, inlet connection diam. 1-1/2 in., pore size 1.0/0.2 μm, cartridge nominal length 2 in. (5 cm)

• Synonym(e): Opticap XL2 Polysep II 1.0/0.2 μm 1-1/2 in. TC/TC
• UNSPSC-Code: 23151806
• eCl@ss: 32031610
• NACRES: NB.24

Eigenschaften

• Materialien: borosilicate glass fiber (BGF) membrane; mixed cellulose esters (MCE) membrane; polypropylene ; polypropylene housing; polypropylene support; polypropylene vent cap; silicone seal
• Qualitätsniveau: 400
• Einhaltung gesetzlicher Vorschriften: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• Sterilität: non-sterile
• Kompatibilität mit Sterilisationsverfahren: autoclavable compatible
• Produktlinie: Opticap^® XL 2
• Leistungsmerkmale: hydrophilic
• Hersteller/Markenname: Opticap^®
• Parameter: 1.0 bar max. inlet pressure (15 psi) at 80 °C; 2.75 bar max. inlet pressure (40 psi) at 60 °C; 25 °C max. inlet temp.; 3.5 bar max. differential pressure (50 psid) at 25 °C; 5.5 bar max. inlet pressure (80 psi) at 23 °C; 80 psig max. inlet pressure
• Methode(n): prefiltration: suitable
• Länge: 14.2 cm (5.6 in.)
• Breite: 3.3 in.
• Nennlänge Kartusche: 2 in. (5 cm)
• Durchmesser: 14.5 cm (5.7 in.)
• Filtrationsfläche: 0.06 m²
• Durchm. Einlassanschluss: 1-1/2 in.
• Breite Einlass bis Auslass: 14.2 cm (5.6 in.)
• Durchm. Auslassanschluss: 1-1/2 in.
• Verunreinigungen: ≤0.5 EU/mL (LAL test, Aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• Gravimetrisch bestimmte extrahierbare Substanzen: ≤45 mg/capsule
• Matrix: Polysep^™ II
• pore size: 1.0/0.2 μm nominal pore size; 1.0/0.2 μm pore size
• Aufnahme: sample type liquid
• Fitting: inlet sanitary flange; outlet sanitary flange; (38 mm (1 1/2 in.) Sanitary Flange Inlet and Outlet)
• Versandbedingung: ambient

Beschreibung

Leistungsmerkmale und Vorteile

Format: Double Layer

Verlinkung

Replaces: SN1M040A8

Hinweis zur Analyse

Gravimetric Extractables: after a 600 mL flush and 24 hours in water at controlled room temperature

Sonstige Hinweise

Directions for Use:

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to the first page of Visual Inspection Guide and introduction section of the Mixed cellulose esters Tech Brief
• Storage Statement: Please refer to the Mixed cellulose esters Tech Brief
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Rechtliche Hinweise

OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany

Polysep is a trademark of Sigma-Aldrich Co. LLC

Sicherheitshinweise

• Lagerklassenschlüssel: 4.1B - Flammable solid hazardous materials
• WGK: WGK 2