1.33004

Lead Standard Solution

traceable to SRM from NIST 0.100 mg/l Pb in HNO₃

• UNSPSC-Code: 41116116

Eigenschaften

• Qualitätsniveau: 200
• spezifische(r) Analyt(en): lead
• Methode(n): photometry: suitable
• pH-Wert: 4 (20 °C in H₂O)
• Dichte: 1.00 g/cm³ at 20 °C
• Format: single component solution
• Lagertemp.: 15-25°C

Beschreibung

Allgemeine Beschreibung

This Spectroquant^® Lead Standard Solution is a high-quality laboratory solution used for internal quality control and method-controlling purposes.

These Spectroquant^® standard solutions perfectly complement our ready-to-use test kits and photometers within the Spectroquant^® portfolio and are ideal for validating international norm methods described in e.g., ISO, EN, APHA, and EPA.

Please visit the Reference Material Quality Grade website to find a comprehensive overview of our different grades of standards.

Anwendung

Lead Standard Solution can be used to check the photometric measurement system (reagents, measurement device, handling) and the mode of working.

Leistungsmerkmale und Vorteile

• Manufactured and tested in DIN EN ISO 9001:2008 accredited laboratory
• The solution is pre-diluted to a concentration that falls into the range of our Spectroquant^® test kits. This eliminates the need for dilution prior to analysis and hence avoids a common source of error
• Ready-to-use diluted reference materials (RMs) along with expanded measurement uncertainty ensure absolute precision
• Accompanied with a certificate of analysis (COA) detailing the certified values, including uncertainty and expiry date
• Directly traceable to standard reference materials (SRM) from the National Institute of Standards and Technology (NIST) or to United States Pharmacopeia (USP)
• Reliable and reproducible results

Hinweis zur Analyse

Concentration: 0.100 ± 0.005 mg/L Pb in HNO₃

Rechtliche Hinweise

SPECTROQUANT is a registered trademark of Merck KGaA, Darmstadt, Germany

Sicherheitshinweise

• Lagerklassenschlüssel: 12 - Non Combustible Liquids
• WGK: WGK 1
• Flammpunkt (°F): Not applicable
• Flammpunkt (°C): Not applicable