1.00316

Hydrochloric acid

25%, for analysis EMSURE^®

• Synonym(e): Salzsäure -Lösung, Chlorwasserstoffsäure
• Empirische Formel (Hill-System): HCl
• CAS-Nummer: 7647-01-0
• Molekulargewicht: 36.46
• MDL-Nummer: MFCD00011324
• UNSPSC-Code: 12352301
• NACRES: NA.21

Eigenschaften

• product name: Salzsäurelösung, 25% for analysis EMSURE^®
• Dampfdruck: 12 hPa ( 20 °C)
• Qualitätsniveau: 300
• Produktlinie: EMSURE^®
• Assay: ≥25.0% (alkalimetric)
• Form: liquid
• Verunreinigungen: ≤0.01 ppm As (Arsenic); ≤0.010 ppm Cd (Cadmium); ≤0.010 ppm Co (Cobalt); ≤0.010 ppm Li (Lithium); ≤0.010 ppm Mn (Manganese); ≤0.010 ppm Sr (Strontium); ≤0.010 ppm V (Vanadium); ≤0.020 ppm Ba (Barium); ≤0.020 ppm Be (Beryllium); ≤0.020 ppm Cr (Chromium); ≤0.020 ppm Cu (Copper); ≤0.020 ppm Mo (Molybdenum); ≤0.020 ppm Ni (Nickel); ≤0.020 ppm Pb (Lead); ≤0.050 ppm Al (Aluminium); ≤0.050 ppm Ge (Germanium); ≤0.050 ppm Tl (Thallium); ≤0.050 ppm Zn (Zinc); ≤0.100 ppm Bi (Bismuth); ≤0.100 ppm K (Potassium); ≤0.100 ppm Mg (Magnesium); ≤0.100 ppm Ti (Titanium); ≤0.100 ppm Zr (Zirconium); ≤0.200 ppm Fe (Iron); ≤0.5 ppm Free chlorine (Cl); ≤0.500 ppm Ca (Calcium); ≤0.500 ppm Na (Sodium); ≤1 ppm NH₄ (Ammonium); ≤1 ppm Sulfate (SO₄); ≤1 ppm Sulfite (SO₃); ≤50 ppm Bromide (Br)
• Glührückstand: ≤5 ppm (as SO₄)
• Farbe: APHA: ≤10
• pH-Wert: <1 (20 °C in H₂O)
• kinematic viscosity: 1.73 cSt(20 °C)
• bp: 107 °C/1013 hPa
• SMILES String: Cl
• mp (Schmelzpunkt): -52 °C
• Dichte: 1.12 g/cm³ at 20 °C
• Lagertemp.: 2-30°C
• InChI: 1S/ClH/h1H
• InChIKey: VEXZGXHMUGYJMC-UHFFFAOYSA-N

Beschreibung

Allgemeine Beschreibung

zur Analyse EMSURE^®

Anwendung

• Research on the Synthesis of Zinc-Ammonium Phosphate Using Galvanic Waste Sludge as a Source of Zinc: This study explores a novel approach using hydrochloric acid solution in the synthesis process aimed at valorizing waste materials. The article demonstrates a chemical strategy that enhances resource recovery, significantly contributing to waste minimization in industrial practices (Morgovan et al., 2024).


• Contactless conductivity sensor employing moist paper as absorbent for in-situ detection of generated carbon dioxide gas: The study integrates hydrochloric acid solutions in the development of a novel, cost-effective contactless conductivity sensor. This sensor uses a simple paper-based system for the in-situ monitoring of gases, providing a significant tool in environmental monitoring and analysis (Nacapricha et al., 2020).

Hinweis zur Analyse

Gehalt (alkalimetrisch)≥ 25,0 %Farbe≤ 10 HazenBromid (Br)≤ 50 ppmFreies Chlor (Cl)≤ 0,5 ppmSulfat (SO₄)≤ 1 ppmSulfit (SO₃)≤ 1 ppmAl (Aluminium)≤ 0,050 ppmAs (Arsen)≤ 0,01 ppmBa (Barium)≤ 0,020 ppmBe (Beryllium)≤ 0,020 ppmBi (Bismuth)≤ 0,100 ppmCa (Calcium)≤ 0,500 ppmCd (Cadmium)≤ 0,010 ppmCo (Cobalt)≤ 0,010 ppmCr (Chrom)≤ 0,020 ppmCu (Kupfer)≤ 0,020 ppmFe (Eisen)≤ 0,200 ppmGe (Germanium)≤ 0,050 ppmK (Kalium)≤ 0,100 ppmLi (Lithium)≤ 0,010 ppmMg (Magnesium)≤ 0,100 ppmMn (Mangan)≤ 0,010 ppmMo (Molybdän)≤ 0,020 ppmNH₄ (Ammonium)≤ 1 ppmNa (Natrium)≤ 0,500 ppmNi (Nickel)≤ 0,020 ppmPb (Blei)≤ 0,020 ppmSr (Strontium)≤ 0,010 ppmTi (Titan)≤ 0,100 ppmTl (Thallium)≤ 0,050 ppmV (Vanadium)≤ 0,010 ppmZn (Zink)≤ 0,050 ppmZr (Zirconium)≤ 0,100 ppmGlührückstand (als SO₄)≤ 5 ppmMindesthaltbarkeit: siehe Produktetikett

Rechtliche Hinweise

EMSURE is a registered trademark of Merck KGaA, Darmstadt, Germany

Sicherheitshinweise

• Piktogramme: GHS05,GHS07
• Signalwort: Danger
• H-Sätze: H290 - H314 - H335
• P-Sätze: P234 - P261 - P271 - P280 - P303 + P361 + P353 - P305 + P351 + P338
• Gefahreneinstufungen: Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1B - STOT SE 3
• Zielorgane: Respiratory system
• Lagerklassenschlüssel: 8B - Non-combustible, corrosive hazardous materials
• WGK: WGK 1
• Flammpunkt (°F): Not applicable
• Flammpunkt (°C): Not applicable