Z564117
Ace pressure filter reactor system
Jacketed, capacity 1 L
Anmeldenzur Ansicht organisationsspezifischer und vertraglich vereinbarter Preise
Alle Fotos(3)
About This Item
Empfohlene Produkte
Parameter
35 psi pressure (at 100°C)
Grundkörper ID × T
100 mm × 180 mm
Kapazität
1 L
Flansch ID
100 mm
Fitting
Ace-Thred
Suchen Sie nach ähnlichen Produkten? Aufrufen Leitfaden zum Produktvergleich
Allgemeine Beschreibung
Rugged heavy-wall reactors with a Schott flange with shallow O-ring groove at the top for connection to a jointed head with quick-release clamp. These complete bench top systems include all components required for operation except an IKA® stirrer motor, model RW 20.n, which is recommended for all reactor sizes. See the stirrer section for a listing of these products.
Choice of two models:
Pressure filter reactor - rated 35 psig @ 100°C, Ace Threds allow use of vacuum or pressure to drain liquid from reactor, 2 x #15 and 1 x #7 AceThreds on 60 mm head, 3 x #15 and 1 x #7 Ace Threds on 100 mm head
Jacketed pressure filter reactor - as above with jacket for heating or cooling reaction
Applications:
Both systems include:
Choice of two models:
Pressure filter reactor - rated 35 psig @ 100°C, Ace Threds allow use of vacuum or pressure to drain liquid from reactor, 2 x #15 and 1 x #7 AceThreds on 60 mm head, 3 x #15 and 1 x #7 Ace Threds on 100 mm head
Jacketed pressure filter reactor - as above with jacket for heating or cooling reaction
Applications:
- Oxidation/reduction reactions where the particulate can be drawn down to a filter cake
- Nanotechnology where the material must be contained and the filtrate is the actual product or nano-particle needed
- Simple Bioreactor as gases can be introduced through pressure head via a pressure or NPT fittings and tubing
- Paints/pigments other viscous solutions
Both systems include:
- Heavy-wall glass reactor body and head, CAPFE O-ring and SS quick-release clamp
- Ace Thred PTFE bottom filter adapter, o-ring, and filter support, PTFE thread adapter, o-ring and PTFE bottom valve. Dead space below frit is 4.5-5 mL liquid w/ water viscosity +/- 0.5 mL
- Non-flaking stir shaft bearing
- Glass stir shaft with PTFE agitator assembly
- Addition funnel
- West condenser
- Support package including holed plate, stand, chain clamp, and holder
- PTFE stoppers
- Chuck adapter for IKA stirrer motor
Take replacement CAPFE O-ring, Ace 7855-880.
Rechtliche Hinweise
IKA is a registered trademark of IKA-Werke GmbH & Co. KG
Hier finden Sie alle aktuellen Versionen:
Analysenzertifikate (COA)
Leider sind derzeit keine COAs für dieses Produkt online verfügbar.
Wenn Sie Hilfe benötigen, wenden Sie sich bitte an Kundensupport
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..
Setzen Sie sich mit dem technischen Dienst in Verbindung.