Z259349

Instatherm^® oil bath

low form, fits flask, 700 mL

• UNSPSC-Code: 41102404

Eigenschaften

• Aufnahme AC/DC: 115 V
• Materialien: metal alloy plate
• Leistungsmerkmale: fits flask 700 mL
• Hersteller/Markenname: Ace Glass 960144
• Verfügbarkeit: not available in EU
• Temperaturmessbereich: ~250 °C
• Kapazität: 700 mL
• Durchm. × H: 125 mm × 65 mm
• Ausgabe: 40, 8 A

Beschreibung

Allgemeine Beschreibung

Low form oil bath only

• Rapid, even heat up to 250 °C
• Suitable for magnetic stirring
• No exposed coils
• Handles a variety of flask sizes and shapes

Instatherm baths have an integral, noble metal alloy fused permanently to the glass and covered with a tough silicone rubber treated glass cloth insulation that serves as a thermal barrier as well as protection against physical shock. Heat response is rapid and thermal lag is low. Typical heating rates are approx. 5 °C per min.

Baths are fitted with permanently attached SS banana type connections. Complete item includes bath, connecting cord, and clip to hold temperature sensor and thermometer.

Use with Ace multiple output (20, 40, 120 V AC) proportional temperature controllers to get precise, accurate, and safe heating since the output voltage is automatically limited. Single output controllers may be used to manually control temperature, but care must be taken not to exceed the maximum voltage rating of the individual bath.

Vorsicht

Caution: Never operate dry. Be certain that a heat exchange medium is in the bath before applying current.

Rechtliche Hinweise

Instatherm is a registered trademark of Ace Glass, Inc.