Direkt zum Inhalt
Merck
Alle Fotos(2)

Key Documents

View All Documentation

441147

Sigma-Aldrich

Polystyrene

average Mw ~350,000, average Mn ~170,000

Synonym(e):

PS

Anmeldenzur Ansicht organisationsspezifischer und vertraglich vereinbarter Preise
Alle Fotos(2)

About This Item

Lineare Formel:
[CH2CH(C6H5)]n
CAS-Nummer:
9003-53-6
MDL-Nummer:
MFCD00084450
UNSPSC-Code:
12162002
PubChem Substanz-ID:
24867334
NACRES:
NA.23

Form

pellets

Qualitätsniveau

100

Schmelzindex

2.0-4.0 g/10 min (200°C/5kg)

Mol-Gew.

average Mn ~170,000
average Mw ~350,000

Stoßfestigkeit

21 J/m (Izod, ASTM D 256, 23 °C, notched)

Verunreinigungen

≤5% mineral oil

Übergangstemp.

Tg 95 °C

Dichte

1.04 g/mL at 25 °C

Elongation

ASTM D 638 - 1.5% (at break)

InChI

1S/C8H8/c1-2-8-6-4-3-5-7-8/h2-7H,1H2

InChIKey

PPBRXRYQALVLMV-UHFFFAOYSA-N

Suchen Sie nach ähnlichen Produkten? Aufrufen Leitfaden zum Produktvergleich

Anwendung

Extrusion molded foamed packaging, dinnerware, bottles and toys. Injection molded packaging containers, toys and disposable cutlery.

Leistungsmerkmale und Vorteile

Hard, clear moderately strong polymer, biologically inert, good dimensional stability. Susceptible to exterior (UV) degradation.

Lagerklassenschlüssel

11 - Combustible Solids

WGK

WGK 3

Persönliche Schutzausrüstung

dust mask type N95 (US), Eyeshields, Gloves

Hier finden Sie alle aktuellen Versionen:

Analysenzertifikate (COA)

Lot/Batch Number
MKCP7904
MKCL2307
MKCH9638
MKCB9723
MKBV4969V

Die passende Version wird nicht angezeigt?

Wenn Sie eine bestimmte Version benötigen, können Sie anhand der Lot- oder Chargennummer nach einem spezifischen Zertifikat suchen.

Suche nach COA

Besitzen Sie dieses Produkt bereits?

In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.

Die Dokumentenbibliothek aufrufen

Kunden haben sich ebenfalls angesehen

Slide 1 of 2

1 of 2

Polystyrol analytical standard, for GPC, 90,000

Supelco

327778

Polystyrol

Polypropylen Isotactic, average Mw ~250,000, average Mn ~67,000

Sigma-Aldrich

427888

Polypropylen

Päivi Grönroos et al.
Sensors (Basel, Switzerland), 19(12) (2019-06-30)
Novel hot electron-emitting working electrodes and conventional counter electrodes were created by screen printing. Thus, low-cost disposable electrode chips for bioaffinity assays were produced to replace our older expensive electrode chips manufactured by manufacturing techniques of electronics from silicon or
Dharneedar Ravichandran et al.
Molecules (Basel, Switzerland), 24(22) (2019-11-17)
Polystyrene (PS) polymers have broad applications in protective packaging for food shipping, containers, lids, bottles, trays, tumblers, disposable cutlery and the making of models. Currently, most PS products, such as foams, are not accepted for recycling due to a low
Prasert Akkaramongkolporn et al.
AAPS PharmSciTech, 10(2), 641-648 (2009-05-20)
The differently sulfonated styrene-divinylbenzene cross-linked copolymer cationic exchange resins were prepared by oil-in-water polymerization and varied degrees of sulfonation. Several characteristics of the obtained resins were evaluated, i.e., Fourier transform infrared spectra, the ion-exchange capacity, microscopic morphology, size, and swelling.
Hui Xia et al.
Journal of colloid and interface science, 376(1), 322-326 (2012-03-27)
The aggregation kinetics of particles in dense polystyrene latex suspensions is studied by low-coherence fiber optic dynamic light scattering. Low-coherence fiber optic dynamic light scattering is used to measure the hydrodynamic radius of the aggregates. The aggregation kinetics data obtained
Harikrishnan Narayanan Unni et al.
Electrophoresis, 30(5), 732-741 (2009-03-05)
This study reports a theoretical and experimental study on the irreversible deposition of colloidal particles from electrokinetic microfluidic flow. The electrokinetic particle transport model presented in this study is based on the stochastic Langevin equation, incorporating the electrical, hydrodynamic, Derjaguin-Landau-Verwey-Overbeek
Alle zugehörigen Dokumente anzeigen

Artikel

Electrospinning: An Enabling Technique for Nanostructured Materials

In this article, we discuss issues critical to successful application of the electrospinning technique, including control of individual nanofibers to form secondary structures and assembly of nanofibers into 3D architectures.

Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..

Setzen Sie sich mit dem technischen Dienst in Verbindung.