SN25A47HH3

Optiscale^® Capsule Filter Polygard^® CN

filtration area 17.7 cm², pore size 2.5 μm

• Synonyme(s) : Optiscale Capsule Polygard -CN 2.5 μm1/4 in. HB/HB
• Code UNSPSC : 23151806
• eCl@ss : 32031610

Propriétés

• Matériaux: PVDF vent cap; fluoroelastomer FKM seal; polycarbonate ; polypropylene ; polypropylene support
• Niveau de qualité: 400
• Conformité réglementaire: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• Fabricant/nom de marque: OptiScale^®
• Paramètres: 25 °C max. inlet temp.; 5.5 bar max. inlet pressure (80 psi) at 25 °C; 80 psig max. inlet pressure
• Diamètre: 6.9 cm (2.7 in.)
• Surface de filtration: 17.7 cm²
• Diam. du raccord d'entrée: 1/4 in.
• Diam. du raccord de sortie: 1/4 in.
• Impuretés: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• Matrice: Polygard^®-CN
• Dimension de pores: 2.5 μm nominal pore size; 2.5 μm pore size
• Entrée: sample type liquid
• Raccords: inlet hose barb; 6 mm (1/4 in.) inlet/outlet hose barb; outlet hose barb

Description

Description générale

Device Configuration: Capsule

Caractéristiques et avantages

Format: Single Layer

Autres remarques

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use:

• Organism Retention: Bacterial
• Mode of Action: Filtration (size exclusion)
• Appliication: Protein Purification
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer to the installation and wetting sections of OptiScale^® 47 Capsulle Filter with Polygard^® CN Media user guide
• Storage Statement: Store in original packaging at room temperature
• Disposal Statement: Dispose of in accordance with applicable federal, state, and local regulations

Notes préparatoires

Sterilization Method
3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable

Remarque sur l'analyse

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

Informations légales

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany