CS40MS01H1

Filtres en profondeur Clarisolve^®

High-density cell cultures

• Synonyme(s) : Clarisolve 40 μm Lab Scale Depth Filters, 0.014 m² (0.15 ft²)
• Code UNSPSC : 23151806
• eCl@ss : 32031690
• Nomenclature NACRES : NB.24

Propriétés

• Matériaux: Millistak+^® media; TPE seal; polypropylene
• Niveau de qualité: 400
• Fabricant/nom de marque: Clarisolve^®
• Paramètres: 2.1 bar max. differential pressure (30 psid) at 37 °C (Forward); 2.1 bar max. differential pressure (30 psid) at 37 °C (Maximum); 2.1 bar max. differential pressure (30 psid) at 37 °C (Reverse); 2.1 bar max. differential pressure (30 psid) at 4 °C (Forward)
• Hauteur: 14 cm (5.3 in.)
• Longueur: 22 cm (8.5 in.)
• Largeur: 7.4 cm (2.9 in.)
• Surface de filtration: 0.014 m²
• Impuretés: <0.25 EU/mL (LAL test, Aqueous extraction; on filter media only)
• Résidus de Carbone Oxydable Total (COT): 0.9-1.2 μg/L
• Entrée: sample type liquid
• Conductivité: 0.91 – 1.29 μS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. A sample of filtrate was pulled every 2 minutes during flush and tested for conductivity.)
• Conditions d'expédition: ambient

Description

Description générale

The CLARISOLVE^® Depth Filters are the first primary clarification offering with a gradient density structure specifically designed to the particle size distributions of pretreated feed streams. With improved volumetric capacity and reduced turbidity over currently available depth filters, the clarification step of pretreated feeds can be processed in a significantly reduced footprint without the need for a secondary stage of clarification.

A μPod scale device, the CLARISOLVE^® depth filter provides the fastest and most efficient way to clarify high-density streams and easily transfer processes from upstream to downstream without the use of centrifugation.

This CLARISOLVE^® filter has a filtration area of 0.014 m².

Remarque sur l'analyse

Total organic carbon (TOC) residue: Post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. At the end of the flush, a sample was pulled for TOC typical values.

Total organic carbon (TOC) residue: TOC for 60HX media was measured at below detectable limits.

Informations légales

CLARISOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, Germany

Informations sur la sécurité

• Code de la classe de stockage: 13 - Non Combustible Solids
• Classe de danger pour l'eau (WGK): nwg
• Point d'éclair (°F): Not applicable
• Point d'éclair (°C): Not applicable