2055105

Inlet-Liner, Split-Typ, Becherdesign (mit 10 % OV-1 auf Chromosorb W HP gepackt)

pkg of 5 ea

• UNSPSC-Code: 12000000

Eigenschaften

• Verpackung: pkg of 5 ea
• L × AD × ID: 78.5 mm × 6.3 mm × 4.0 mm

Beschreibung

Allgemeine Beschreibung

Inlet liner is an important part within the injection port. The prime functions of inlet liner are to limit sample degradation and improve vaporisation along with correct positioning of syringe needle. A wrong choice of liner can have prominent effect on the chromatogram. The basic problems related with incorrect choice of liner include the higher potential of peak tailing and mass discrimination. The inlet liner volume is recommended to be larger than the amount of sample injected by syringe so as to avoid any reaction with the sample. Injector port liner is suitable to make connection between sample introduction and GC column. Split type has wide bore with 2 or 4 mm I.D. which is suitable for solvent extraction. Cups are used to enable sample mixing.
OV-1 is a modified silicone polymer which has good temperature stability. It is suitable as liquid phases in chromatography. The least polar is a dimethylsilicone which is sold under the mane OV-1.
Chromosorb W, a fragile white solid prepared heating the diatomaceous earth with a flux. The resulting fine structure is cemented over glass which results in large and irregular pores. HP is the classification of a support as high performance grade.

Deactivated glass liners for capillary injection ports.

Sicherheitshinweise

• Piktogramme: GHS08
• Signalwort: Danger
• H-Sätze: H372
• P-Sätze: P260 - P264 - P270 - P314 - P501
• Gefahreneinstufungen: STOT RE 1 Inhalation
• Zielorgane: Lungs
• Lagerklassenschlüssel: 6.1C - Combustible acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects
• WGK: WGK 1
• Flammpunkt (°F): 214.0 °F - closed cup
• Flammpunkt (°C): 101.1 °C - closed cup