1.17349
MAS-100 Atmos® Gas Exhaust Tube Set
for use with MAS-100 Atmos®
Anmeldenzur Ansicht organisationsspezifischer und vertraglich vereinbarter Preise
Alle Fotos(2)
About This Item
UNSPSC-Code:
41103403
NACRES:
NA.74
Empfohlene Produkte
Materialien
PVC tubing
stainless steel adapter
Leistungsmerkmale
autoclavable
Hersteller/Markenname
MAS-100 Atmos®
Länge Schlauch
5.0 m
Anwendung(en)
compressed gas monitoring
cosmetics
food and beverages
pharmaceutical
Kompatibilität
for use with MAS-100 Atmos®
Allgemeine Beschreibung
The MAS-100 Atmos® Gas Exhaust Tube Set is an accessory for MAS-100 Atmos® Microbial Compressed Gas Sampler for safe sampling of gases and prevent intoxication or contamination of the environment.
In case, if only the adapter for gas exhaust tubing (product 1.17348) is required for an alternative tubing, it must be ensured that the tubing that is used has a minimum inner diameter of 32 mm and a maximum length of 5 m. These are the conditions validated by the manufacturer.
The connector piece of the Gas Exhaust Tube is connected to the exhaust of the MAS-100 Atmos® instrument. The tubing is fixed to the connector with the tri-clamp. The end of the tubing is open and can be adapted on site to the respective application.
The tubing can be disinfected by spray or wipe disinfection with 70% ethanol or 70% IPA. The stainless-steel connector itself can be autoclaved at ? 134°C for 5mins or 121°C for 20 min.
In case, if only the adapter for gas exhaust tubing (product 1.17348) is required for an alternative tubing, it must be ensured that the tubing that is used has a minimum inner diameter of 32 mm and a maximum length of 5 m. These are the conditions validated by the manufacturer.
The connector piece of the Gas Exhaust Tube is connected to the exhaust of the MAS-100 Atmos® instrument. The tubing is fixed to the connector with the tri-clamp. The end of the tubing is open and can be adapted on site to the respective application.
The tubing can be disinfected by spray or wipe disinfection with 70% ethanol or 70% IPA. The stainless-steel connector itself can be autoclaved at ? 134°C for 5mins or 121°C for 20 min.
Anwendung
MAS-100 Atmos® Microbial Compressed Gas Sampler is used to sample pre-defined compressed gases like argon, carbon dioxide, compressed air, and nitrogen from pharmaceutical, cosmetic, food & beverage industry.
Leistungsmerkmale und Vorteile
- Removes potentially toxic gas out of the sampling environment.
- 5 m distance between instrument exhaust and room exhaust.
Komponenten
The MAS-100 Atmos® Gas Exhaust Tube Set consists of:
- 5m PVC Tube.
- Stainless Steel Connector.
- Tri-clamp (50.5mm)
- Silicone Gasket.
Rechtliche Hinweise
MAS-100 Atmos is a registered trademark of MBV AG
Ähnliches Produkt
Analysenzertifikate (COA)
Suchen Sie nach Analysenzertifikate (COA), indem Sie die Lot-/Chargennummer des Produkts eingeben. Lot- und Chargennummern sind auf dem Produktetikett hinter den Wörtern ‘Lot’ oder ‘Batch’ (Lot oder Charge) zu finden.
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..
Setzen Sie sich mit dem technischen Dienst in Verbindung.