Direkt zum Inhalt
Merck

265829

Sigma-Aldrich

Gold

foil, thickness 0.5 mm, 99.99% trace metals basis

Synonym(e):

Gold Powder, Gold element

Anmeldenzur Ansicht organisationsspezifischer und vertraglich vereinbarter Preise


About This Item

Empirische Formel (Hill-System):
Au
CAS-Nummer:
Molekulargewicht:
196.97
EG-Nummer:
MDL-Nummer:
UNSPSC-Code:
12141717
PubChem Substanz-ID:
NACRES:
NA.23

Assay

99.99% trace metals basis

Form

foil

Widerstandsfähigkeit

2.05 μΩ-cm, 0°C

Dicke

0.5 mm

bp

2808 °C (lit.)

mp (Schmelzpunkt)

1063 °C (lit.)

Dichte

19.3 g/mL at 25 °C (lit.)

SMILES String

[Au]

InChI

1S/Au

InChIKey

PCHJSUWPFVWCPO-UHFFFAOYSA-N

Allgemeine Beschreibung

Gold is one of the most popular materials to be used for neutron flux monitoring mainly because it possesses a large thermal cross section for neutron capture (197Au(η, η) 198Au. Gold has the half-life of 2.7 days.Reports show that the rate of dissolution of Au is very fast in SnPb solder.

Anwendung

Gold based neutron flux monitors may use gold foils. Au foils may be used to form a AuSn/Au joint system for opto-electronic chips. Modified gold foil electrode may be used to study heterogeneous electron transfer properties of biological electron transfer proteins.3 Electrodeposited polycrystalline palladium-nickel alloy on gold foils may be investigated for the enhanced catalytic behavior of the alloy.

Menge

6 g = 25 × 25 mm

Lagerklassenschlüssel

11 - Combustible Solids

WGK

nwg

Flammpunkt (°F)

Not applicable

Flammpunkt (°C)

Not applicable

Persönliche Schutzausrüstung

Eyeshields, Gloves, type N95 (US)


Analysenzertifikate (COA)

Suchen Sie nach Analysenzertifikate (COA), indem Sie die Lot-/Chargennummer des Produkts eingeben. Lot- und Chargennummern sind auf dem Produktetikett hinter den Wörtern ‘Lot’ oder ‘Batch’ (Lot oder Charge) zu finden.

Besitzen Sie dieses Produkt bereits?

In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.

Die Dokumentenbibliothek aufrufen

Kunden haben sich ebenfalls angesehen

Slide 1 of 6

1 of 6

Gold foil, thickness 0.009 mm, size 50 × 50 mm, purity 99.9%

GF01036820

Gold

Gold foil, thickness 0.004 mm, size 50 × 50 mm, purity 99.9%

GF04670333

Gold

Gold microleaf disks, 10mm, thinness 0.5μm, specific density 966μg/cm2, removable support, 99.99+%

GF47078129

Gold

Gold foil, thickness 0.001 mm, size 25 × 25 mm, purity 99.9%

GF67126697

Gold

Study of wetting reaction between eutectic AuSn and Au foil.
Lai YT and Liu CY
Journal of Electronic Materials, 35, 28-34 (2006)
Performance and comparison of gold-based neutron flux monitors.
Steinhauser G, et al.
Gold Bulletin, 45, 17-22 (2012)
A kinetic study of oxygen reduction reaction on palladium-nickel alloy surfaces.
Li B, et al.
Electrochemical Society Transactions, 6(25), 139-144 (2008)
Tianxun Gong et al.
Journal of biomedical nanotechnology, 9(6), 985-991 (2013-07-19)
In this paper, we proposed the use of gold nanoparticles as plasmon scattering probes for dark-field multiplex imaging of live cancer cells. By carefully engineering the surfaces, aqueous dispersions of anti-EGFR antibody-conjugated gold nanospheres and gold nanorods are prepared. We
Tae-Sik Cho et al.
Journal of nanoscience and nanotechnology, 13(5), 3711-3714 (2013-07-19)
The crystallization of Au/glass ultrathin films for surface plasmon resonance (SPR) biosensor has been studied using synchrotron X-ray scattering and field emission scanning electron microscope. In films thinner than 30 nm, crystallized Au grains with [111] preferred orientation were formed

Artikel

Can there be an effective strategy for finding breakthrough materials, since they are, by definition, unpredictable? One answer is found in Combinatorial Materials Science techniques, which represent a powerful approach to identifying new and unexpected materials.

Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..

Setzen Sie sich mit dem technischen Dienst in Verbindung.