Z707546

TPP^® tissue culture flasks

• Synonyme(s) : T75 flask
• Code UNSPSC : 41122104

Propriétés

• Matériaux: angled neck ; polystyrene ; screw top cap
• Stérilité: sterile
• Caractéristiques: with cap filtered
• Conditionnement: case of 100; pack of 5
• Fabricant/nom de marque: TPP TPP 90076
• Capacité: 65 mL
• L externe × l × H: 150 mm × 85 mm × 35 mm
• Superficie: 75 cm² , growth surface (cm²)
• Volume de travail: 8-15 mL
• Adéquation: suitable for (cell culture; tissue culture)
• Type de liaison: Tissue Culture (TC)-treated surface

Description

Description générale

The inside surface treatment by TPP provides an optimal growth surface on the flask base for the most varied matrix-dependent tissue cultures. The untreated side and top inside surfaces reduce the amount of cell loss during the separation phases, because undesired tissue adhesion outside the growth zone is diminished. The flask′s innovative shape is of such a design that devices inserted through the flask′s neck have optimal access to the entire base surface. This means that there are no "dead" corners that cannot be reached with pipettes or cell scrapers.

This excellent accessibility is due to the large neck opening and the favorable angle of inclination. The angled neck also reduces the chance of accidental spills and permits "dribble-free" pouring.

When the vented screw cap is tightened to the end position, the closed tissue culture flask is liquid and gas tight. By simply unscrewing the cap one quarter of a turn, the flask is in the "VENT" position, with the inside of the flask being aerated through a defined gap opening. This guarantees that the gas exchange with the environment and the possible risk of contamination are kept to a minimum. In addition, the special flat thread profile of the caps stops excess tightening and thus allows the caps to be re-used multiple times.

The TPP filter cap has a welded membrane in the cap cavity to offer free gas exchange without gas flow alteration. For optimal flask breathing, all membranes are proportionally dimensioned to each cap size. The microporous hydrophobic membrane (cytotoxic free) itself is constructed of 2 layers of membrane material based on a white acrylic copolymer over nylon support. With an airflow rate of 4.5 (LPM/3.7cm²/13.5psi), the gas exchange properties of the filtered flasks are comparable to that of the standard cap flasks.

Informations légales

TPP is a registered trademark of TPP Techno Plastic Products AG